Tianhui three-stroke input method 2019.1.5 official version

A basic introduction to Tianhui three-stroke input method

The official version of the Tianhui three-stroke input method has a low code repetition rate, easy to remember character roots, easy to separate characters, and easy to retrieve codes. It mainly uses "three codes" and "four codes" as a supplement. Most Chinese characters have three-level simplified characters. code. It uses a combination of sounds and shapes to get codes based on strokes and pronunciation of root characters. You only need to memorize three root characters (氵,徶,廴 in the A key). It is simple and easy to learn. Once you learn it, you will never forget it. When inputting Chinese characters, it takes an average of 1.8 keys to type one word. The font library (more than 8,500 Chinese characters in GB2312 and some common characters in GBK) and thesaurus have a large capacity. It is currently the most convenient, practical, fastest, easiest to learn, and most complete function for inputting Chinese characters. One of the laws.

Introduction to the functions of Tianhui three-stroke input method

(1) Normative: Follow the national language and writing standards, and follow the rules of Chinese pinyin and stroke order of Chinese characters.

(2) Easy to learn: The rules are simple, and the code is obtained according to the strokes and pronunciation of the root. It is easy to learn, use and remember. It takes five minutes to learn and ten minutes to master.

(3) Speed: You can easily type more than 200 words per minute. Typing Chinese characters is faster than typing English, reaching or even exceeding the fastest Chinese character input method currently.

(4) Scientificity: Careful selection of strokes, radical types, and code acquisition principles form an excellent keyboard layout.

(5) Practicality: It can input GBK21003 Chinese characters, a large vocabulary library, and complete functions; it can help you correct pronunciation and writing errors during the typing process.

(6) Multi-function: You can import phrases in batches; edit user phrases and other functions.

Root browsing:

The root composition of the three-stroke input method is based on the fact that there is no need to remember. The key where the root is located is the English letter key corresponding to the first letter of the pronunciation of the root. There are a few root words that you can memorize cleverly and which you will never forget.

How to use Tianhui three-stroke input method

Input method rules:

1. Principle of character splitting

1. According to the stroke order, from left to right, from top to bottom, from outside to inside;

2. If there are connections or not, take the larger one first (the one who comes first will be the largest one), taking both intuition into consideration.

P.S.:

1) "Connected but not intersecting" means that it can be divided into connected radicals (or strokes) but not into intersecting radicals (or strokes). For example: "Heaven" can be divided into "one, big", but not into "two, human".

2) "Two horizontal lines" if the upper horizontal line and the lower horizontal line are equal in length are regarded as "two", and if they exceed the length, they are not regarded as "two", and "horizontal lifting" is not regarded as "two". For example: "North" is broken down into "丨,一,一,dagger".

3) "Fruit" can be split into "曰,木" and cannot be split into "田,木". Similar words, such as: out, attack, inside, etc.

4) The roots of characters are scattered and the stroke order does not need to be followed. For example: "啷" can be broken down into "Tu,丷,囗,口", and "金" can be broken down into "人,王,丷".

5) The stroke order of "Nai, Dao, Wan, Li" is "fold first and then fold", and "Jiu, Ji" is "first fold then fold".

6) "叚" can be broken down into "コ,丨二,コ,you", and "官" can be broken down into "宀,丨,コ,コ".

7) Examples of character splitting:

2. Word input

1. Single character: the first code is the first letter of the pronunciation of the character, the second and third codes are the first and second codes of the shape code, the character is not in the first place (meaning that the character cannot be directly displayed on the screen by pressing the space bar) and the third complement code is code, there is no third code to make up the last stroke of the word. Such as: single——dbo, and——jpvn

2. Combined characters: The first code is the first letter of the pronunciation of the word, the second code is the first code of the beginning, the third code is the first code of the tail, if the word is not in the first place, add the second code of the tail, if there is no word in the tail, add the second code of the beginning. Two codes, there is no second code in the first part to make up the last stroke of the character.

P.S.:

1) Compound characters refer to characters composed of two or more parts, which can be split according to structure or can be split meaningfully. Such as: love, high, side, people, sleepiness, illness, confusion, etc.

2) Detailed rules for splitting combined characters:

a. Split according to structure mainly, and split based on rationale as a supplement.

b. Left-center-right structure: The first (part) is the smallest (i.e.: left + center-right). For example: "Stand" is split into two parts: "扌" (the first part) and "difficulty" (the tail), and "Do" is split into "任" and "古".

c. Top, middle and bottom structure: the first (part) and last (part) characters are given priority (the maximum number of characters formed is as large as possible), the first (part) is given priority as a character, and the last (part) is given priority as a character, otherwise the first (part) is given the smallest value. (ie: upper + middle lower).

d. Wrap-up (half-wrap) structure: the first (part) and last (part) characters (take the largest possible character) are given priority, the first completed character is given priority, otherwise the first character is given the smallest value.

e. Special structures: For example: "Wu" is split into "Gong" and "Cong", "Guai" is split into "Qian" and "Bei", "Sitting" is split into "Cong" and "Tu", " "Cheng" is divided into "禾" and "北" etc.

3) For some characters, such as "鱼, 丞, 亟", etc., when it is difficult to distinguish between "single" and "combined", intuitively, they can be split according to the structure, or they can be input as single characters.

4) Examples of splitting combined characters:

3. Word input

1. Two-character words: Take the first two digits of each word. Such as: astonishment - eirx, benevolence - rraa, annoyance - aini, engineering - ghch

2. Three-character words: Take the first digit of the first two characters and the first two digits of the third character. Such as: bereaved dog - sjqd, nrjm - internal combustion engine,

Solar energy - tyns, Guangzhou City - gusf, medical expenses - yyfg, Moscow - mskh, input method - srfa

3. Multi-character words: Take the first code of the first four characters. For example: all the best——wsry, guard against arrogance and impetuosity——jjju, be respectful——ggjj,

Work-study program——qgjx, Playboy——hhgu, A clever woman cannot make a meal without rice——qfnw, Respect is worse than obedience——gjbr

4. Enter the example:

4. Radical input

For radical input, i is used to replace the phonetic code, and the other input is the same as for single character input. Such as: 亻——ipi,彳——ipr, *——ihi

Tips and features:

1. ① [What to do if you don’t know the pronunciation] You can use [V] to replace the pronunciation. After typing, you will be prompted for the correct pronunciation. ② [What to do if you don’t know the shape code] You can use [Z] instead of the shape code. After typing, you will be prompted for the correct encoding. Both help keys can be used simultaneously.

2. ① Switch to GBK state, and you can input all Chinese characters in GBK (21003). ② "i+number" can input Chinese "lowercase", such as: input "i235", you can input "two hundred and thirty-five"; "o+number" can input Chinese "uppercase", such as input "o235", you can input "二One hundred and thirty five." ③You can enter "○" for "io", "one" for "oy", "two" for "oe", etc.

3. Each sound of multi-phonetic characters has a code. Such as: row——xrei——hrei, red——hjg——gjg, multiply——chih——shih

4. Simple code words:

5. Fault-tolerant function (note: there are several ways to spell a Chinese character):

1) Shape code error tolerance:

2) Tone code error tolerance (optional):

a.R and Y are fault tolerant. Such as: Rgr (positive), ygr (Rong), You - yaf (positive), raf (Rong)

b.S and X fault tolerance. Such as: brake - spi (positive), xpi (capacity), Xia - xhb (positive), shb (capacity)

c.N and L fault tolerance. Such as: warm - noa (positive), loa (capacity), dry - lof (positive), nof (capacity)

6. Postcode prompts and word association:

After you type in the previous code of a Chinese character, [Three-stroke Input Method] will tell you the next code of the word in the prompt area, so that you can type most commonly used Chinese characters with one code; when you type a single character, there are many prompt areas Words are available for you to choose. If the prompt area does not appear, the method is to right-click the word "three strokes" on the status bar, select "Postcode Prompt" and "Word Association" from the pop-up menu, and press OK. .

7. Word creation function:

1) Real-time word creation

a. First enter the words that make up the new word in sequence;

b. Then press the "Ctrl+=" key combination to enter the word creation state, and the prompt line displays the two latest words entered by the user;

c. By pressing the + and - keys or the left and right cursor keys, you can increase or decrease the words that make up the phrase;

d. Use Backspace to delete the word before the cursor, and press Delete to delete the word after the cursor;

Finally, press the Enter key, and the new word will be automatically added to the user vocabulary.

Tip: During the word creation process, the user can press the Esc key to exit the word creation state at any time.

2) Custom phrases

Right-click the status prompt button and select "Edit User Phrases" under "Management Tools" in the settings menu to customize commonly used phrases.

3) Delete phrases

There are two methods:

a. After the candidate board appears, directly press the "Ctrl+Shift+Serial Number" key combination to quickly delete it.

b. First enter the phrase that needs to be deleted, then press the "Ctrl+-" key combination to enter the word deletion state, and finally press the Enter key to delete.

8. Multiple functions:

■ Numeric keypad: Fixed to input half-width numbers and English symbols.

■ Pinyin prompt (this function is optional): Each time a word is entered, the pinyin and tones of the word will appear in the code acquisition window.

■ New v key prompts and pinyin auxiliary input: first enter vv to enter the pinyin auxiliary input function. The user can then enter the full spelling of a certain character and find the desired Chinese character by turning the pages. At the same time, the system marks the three-stroke code of the character behind each character. This function not only helps users input words that cannot be split, but also reverses the encoding.

■ Repeat the recent word or symbol: "z+space" (valid for coded punctuation marks).

■ “zz+coding”: input series symbols. Please refer to {Three-stroke series symbol coding list}

Tianhui three-stroke input method update log

1. Fix bugs in the previous version

2. Optimize some functions