How to use
1. After downloading, unzip and double-click to enter the installation program, select the directory you want to install and click Next
2. Complete the installation according to the user installation instructions.
FAQ
※After the installation of the wireless network card driver and client is completed, open the TP-LINK wireless client application. If the following problems occur:
1. The options on the client interface are all gray and cannot be operated.
2. No signal can be found, but it is confirmed that there is a strong wireless signal around;
Please follow the following methods to troubleshoot:
Check one
Confirm that the network card is plugged in:
If the wireless network card is not plugged in properly and the computer does not recognize the wireless network card, the client software will not be able to use it. Please unplug and insert the wireless network card, or change the USB port to test.
Check 2
Reinstall the driver and client
It is recommended to turn off the computer firewall and anti-virus software, and uninstall the installed drivers and clients. Reinstall the wireless network card driver and client software.
Check 3
Change to another computer for testing
Plug the wireless network card into another computer and test whether it can be used normally.
※When using the client application of the wireless network card to connect to the wireless network, if there is a problem that the signal is not found and the connection is unsuccessful, please follow the following methods to troubleshoot:
Check one:
Confirm wireless name
Connecting to the wrong signal will result in unsuccessful connection. Please confirm the wireless signal name (SSID number).
Confirmation method: Connect and log in to the router management interface through a wired computer, click Wireless Settings >> Basic Settings to view the SSID. As shown below:
Note: This article uses the TP-LINK wireless router as an example. The actual wireless router shall prevail in the application environment.
After confirming the signal name, search for the confirmed wireless signal again and try to connect again.
Check 2:
Confirm wireless password
Entering an incorrect wireless password will also result in an unsuccessful connection. Please confirm the wireless password.
Confirmation method: Log in to the router management interface, click Wireless Settings >> Wireless Security Settings to confirm the wireless password. As shown below:
Check three:
Turn off wireless MAC address filtering
Wireless MAC address filtering is enabled on the router. Improper rule setting may also cause wireless connection failure. It is recommended not to enable this function for the time being.
Setting method: Log in to the router management interface, click Wireless Settings >> Wireless MAC Address Filtering to turn off the wireless MAC address filtering function. As shown below:
Check four:
Modify ssid and wireless password
If the password is entered correctly but cannot be connected, it is recommended to change the SSID name and wireless password, save and restart the router, and test whether the wireless connection is successful.
Setting method: Connect and log in to the router management interface through a wired computer, click Wireless Settings >> Basic Settings, modify the SSID, and click Save. Click Wireless Settings >> Wireless Security Settings, modify the PSK password, and click Save >> Restart.
After the restart is completed, the wireless terminal attempts to connect to the modified wireless signal.
Check five:
Configure with Windows enabled
For Windows XP systems only.
Computer Setup Configuring my wireless network settings using Windows is causing problems.
Cancel method: Right-click My Network Places and select Properties, right-click Wireless Network Connection and select Properties, click Wireless Network Configuration, uncheck Configure my wireless network settings with Windows, and click OK.
Check 6: Compare other wireless terminals
Use another wireless terminal to connect to the router and confirm whether the application can be connected normally. You can also use this wireless network card to connect to other normal wireless networks for comparison testing.
it works
it works
it works