How to use:
1. Turn on your computer, power on PHANTOM 2 and connect it to your computer via Micro-USB. Do not disconnect the power until the parameter adjustment is completed.
2. Run the assistant software and wait for the main controller to connect to the assistant software. The PC connection indicator light is always green and the communication indicator light is flashing blue, indicating that the main controller and the assistant are connected and can communicate normally.
3. Configure all parameters on the "Basic" and "Advanced" pages.
4. Check the set parameters on the "View" page.
Notes on use:
(1) Please turn on the Naza-M function by clicking the Phantom 2 and Naza-M function switch button after completing the advanced flight training in the flight training manual. After turning on the Naza-M function, you will be able to switch attitude mode, GPS mode and manual mode, and make some advanced settings (such as IOC function).
In addition, the LED indicator light located on the tail arm will follow the indication method of Naza-M, not the indication method of Phantom 2. If you are not a professional player or are under the guidance of a professional, please do not enable the Naza-M function.
(2) After turning on the Naza-M function, you can still switch it back to the Phantom 2 function by clicking the button. Switch back to Phantom 2 function, and all parameters will be restored to the default parameters when Phantom 2 leaves the factory.
it works
it works
it works