After downloading and installing the e-mail client, you only need to enter your mobile phone number and password to access the Internet. The fee is 30 yuan per month and you can enjoy 2M of exclusive bandwidth. However, the E-xin network has been fully upgraded recently, reaching a high-speed network of 20M, with a download speed of up to 2M/s, which is very cost-effective.
Campus broadband package introduction:
1. Business description: Campus broadband package is a broadband service provided by Wuhan Telecom for Guangdong University students in Wuhan. Users can enjoy 2M exclusive bandwidth by dialing through a dedicated dial-up software e-mail, and only need to pay 30 per month. Yuan.
2. Business characteristics:
(1) Installation is quick and easy. At present, most campuses that can promote campus broadband packages have undergone Ethernet transformation, and students only need to use one network cable to access the Internet.
(2) High-speed Internet access, exclusive bandwidth. Campus broadband packages can transmit data at a very stable rate. In the Ethernet area, the downlink and uplink are symmetrical, both 2Mbps.
3. Business usage instructions
1) For first time use, create a new pppoe dial-up and use the public account wuhan and password wuhan to connect;
2) Log in to kd.wuhan.net.cn, select the campus broadband package self-service, enter your broadband account (i.e. mobile phone number) in the pop-up window, and a text message containing a verification code will be sent to your mobile phone; in the pop-up window Enter the verification code and a text message containing the password will be sent to your mobile phone;
3) Download and install the e-mail client software;
4) Exit the pppoe dial-up software, open the e-mail client, select ordinary broadband-wired connection, enter the mobile phone number and broadband password, and click to log in.
Wireless E-signal router setting method:
E-Xin Wireless is a wireless extension of E-Xin Broadband. It converts wired signals into wireless signals through wireless routers. Smart terminals such as mobile phones and IPADs can use E-Xin Broadband after installing client software.
1. TP-link model: wr842n
front view
How to initialize a wireless router
To initialize, use a toothpick, ballpoint pen or other sharp object to press the small button in the reset hole, hold it for 8 seconds and then release the button. The small green lights on the router panel will flash off in sequence, indicating successful initialization.
rear view
Note: The blue network port cannot be used to connect to China Telecom’s network, but the other four LAN ports can
Connection after successful initialization: Use a network cable to connect a LAN port of the TP-LINK wireless router to the computer network port.
Set the computer IP: Manually set the computer IP to 192.168.1.100, which is in the same network segment as the router’s management address.
4. The steps to set the computer’s IP address are listed in XP:
Click on Network Places on the desktop, then right-click and select Properties
Select Local Area Connection, click Network Places on the desktop, then right-click and select Properties
Select Internet Protocol (TCP/IP), double-click the mouse to set the IP address and click OK
5. Enter 192.168.1.1 in IE. After the system is initialized, you will see the following reminder:
3. Follow the prompts to set a new password and confirm it.
How to turn off the DHCP function of the wireless router
1. Use a network cable to connect a white port of the TP-LINK wireless router to the computer network port. Set computer IP: Manually set computer IP to 192.168.1.100
2. Enter 192.168.1.1 in IE, enter the user name and password, and then enter the following management interface.
3. Select the DHCP service in the list on the left, and see that the area on the right shows the options of enabling or disabling the DHCP service. To turn off the DHCP function, select disable here, and remember to save!!! As shown in the figure below:
How to set the SSID and password of your wireless router
Select Wireless Settings--à Basic Settings Service in the list on the left. When you see the SSID number setting displayed in the right area, give it a name to facilitate discovery when searching for wireless. The frequency band can be selected automatically. If there are many wireless devices attached and there is interference, resulting in poor signal, you can change and set other frequency bands here to avoid conflicts. After setting, you can save it.
2. To set a password for the SSID to prevent others from accessing the Internet without permission, select Wireless Settings--à Wireless Security Settings Service in the list on the left, select "WPA-PSK/WPA2-PSK", and in the "PSK Password:" column Enter your own password, which must be 8 characters or longer, preferably a combination of numbers and letters. Finally, remember to click the "Save" button in the lower left corner.
How to modify the wireless router management account and password
1. In order to prevent others from tampering with the settings of the wireless router, it is best to reset the default password of the wireless router. To set the management password, select the system tool in the list on the left - à modify the login password, and save it after the modification is completed.
2. Mercury MW153R Model: MW153R
front view
How to initialize a wireless router
To initialize, use a toothpick, ballpoint pen or other sharp object to press the small button in the reset hole, hold it for 8 seconds and then release the button. The small green lights on the router panel will flash off in sequence, indicating successful initialization.
rear view
The functions of the buttons from left to right in the picture above:
1. When you forget your login password, or reset all the set data, when the power is turned on, press this button for about 8 seconds and then let go, then unplug the power, wait a few seconds and then turn it on again, and then it will be restored. set by default
2.Power jack
3. The blue port does not connect to the telecommunications network
4. Connect to the network port of the telecommunications network.
Enlarged view of reset button
Connection after successful initialization: Use a network cable to connect a LAN port of the Mercury MW153R wireless router to the computer network port.
Set the computer IP: Manually set the computer IP to 192.168.1.100, which is in the same network segment as the router’s management address.
4. The steps to set the computer’s IP address are listed in XP:
Click on Network Places on the desktop, then right-click and select Properties
Select Local Area Connection, click Network Places on the desktop, then right-click and select Properties
Select Internet Protocol (TCP/IP), double-click the mouse to set the IP address and click OK
5. Enter 192.168.1.1 in IE. After initialization, you will see the following reminder:
3. The username and password after initialization are both lowercase admin.
How to turn off the DHCP function of the wireless router
1. Use a network cable to connect a white port of the Mercury MW153R wireless router to the computer network port. Set computer IP: Manually set computer IP to 192.168.1.100
2. Enter 192.168.1.1 in IE, enter the user name and password, and then enter the following management interface.
3. Select the DHCP service in the list on the left, and see that the area on the right shows the options of enabling or disabling the DHCP service. To turn off the DHCP function, select disable here, and remember to save!!! As shown in the figure below:
How to set the SSID and password of your wireless router
Select Wireless Settings--à Basic Settings Service in the list on the left. When you see the SSID number setting displayed in the right area, give it a name to facilitate discovery when searching for wireless. The frequency band can be selected automatically. If there are many wireless devices attached and there is interference, resulting in poor signal, you can change and set other frequency bands here to avoid conflicts. After setting, you can save it.
2. To set a password for the SSID to prevent others from accessing the Internet without permission, select Wireless Settings--à Wireless Security Settings Service in the list on the left, select "WPA-PSK/WPA2-PSK", and in the "PSK Password:" column Enter your own password, which must be 8 characters or longer, preferably a combination of numbers and letters. Finally, remember to click the "Save" button in the lower left corner.
How to modify the wireless router management account and password
In order to prevent others from tampering with the settings of the wireless router, it is best to reset the default password of the wireless router. To set the management password, select System Tools in the list on the left - à Modify Login Password, and save it after the modification is completed.
it works
it works
it works