Western Digital Hard Drive Repair Tool (WD Pro Tool) Software Functions
This software can clear the physical bad sectors on the surface of the hard disk. It is not simply hiding it, but actually repairing the bad sectors!
It can clear hard drive bad sectors and repair hard drive soft faults.
CanbackupWrite back ROM and firmware, scan bad sectors and add them to G table, clear SMART table, set hard disk parameters, enable SF self-calibration function, etc.
WD Pro Tool software features
The software is green and free, with powerful functions
Supports Western Digital hard drives with multiple interface types
Not subject to any file system format restrictions
Supports unpartitioned hard drives and multiple formats such as FAT, NETF, EXT3, HFS, etc.
Western Digital Hard Drive Repair Tool (WD Pro Tool) Installation Steps
1. Download the Western Digital Hard Drive Repair Tool (WD Pro Tool) from the Huajun Software Park and get a software compressed package.
2. Then decompress the software compressed package and get the WDR5.3 unrestricted version .exe.
3. Finally, double-click to open WDR5.3 Unlimited Edition.exe and you can use it.
How to use WD Pro Tool
Step 1: After registration, open the software
Step 2: Set the maintenance disk port: click Settings--"Port--" the primary port, secondary port, and custom port USB will appear. Generally, if it is not a USB mobile hard disk, choose "custom port"
If you select a custom port, the following will appear:
there are 6 lines of parameters in this box, one of which is the port that we just want to repair, if you don’t know which one is. We need to try clicking on the interface one by one to check with the obtained parameters until we find the disk to be repaired.
The third step is to enter the maintenance procedure: as shown below:
You can clearly see the hard drive model, FW S/N LBA capacity. Please check carefully to see if it is the hard drive you want to repair.
Western Digital Hard Drive Repair Tool (WD Pro Tool) Frequently Asked Questions
Question: How do I use WD Pro Tool to repair a drive?
Answer: Setting the working directory folder mainly involves backing up the ROM and firmware to a location; as shown below
Choose where you want to store it or where you want to write it from.
Question: How to back up the firmware of Western Digital Hard Drive Repair Tool (WD Pro Tool)?
Answer: Click on the operation module and it will appear
Then we right-click on the front firmware and it will appear
Clicking Read All will back up the firmware, and clicking Write All will write all the firmware in. However, you must set the working directory before writing the firmware to avoid errors.
Comparison of similar software
SSD Repair ToolThe official version is a very excellent and practical tool that can be used to repair computer hard drive failures. The official version of the solid-state drive repair tool is green, safe, and non-toxic, so you can use it with confidence! Of course, hard drive problems are not caused by the software. It can be repaired, so you need to use this software combined with real-life tools and follow the tutorial to check and repair the hard drive.
Mobile hard drive repair toolThe function of the software is very powerful. By using this software, you can effectively repair the mobile hard disk and restore the files on the mobile hard disk. If the prompt "Not formatted", "Requires formatting" appears on your mobile hard drive, or it is in Raw format, you can use the mobile hard drive repair tool software to recover it.
Huajun editor recommends:
WD Pro ToolCan display register status, supports WD-L/WD-ROYL board, can perform hard disk soft reset, can identify hard disk, view or clear SMART. Western Digital hard drive repair tool (WD Pro Tool) is professional, easy to operate, and powerful. It is one of the leaders in the software industry. Everyone is welcome to download it.
it works
it works
it works