【How to use】
Instructions for use: 1. The cumulative number of scan times and alarms set by the server must be greater than or equal to the automatic shutdown time set by Pubwin. 2. The content of the server configuration file is as follows: Interval=1 //Scanning interval Count=2 //Cumulative number of times WarningFile=Reminder.wav //Alarm sound file. The server does not need ThreadCount=20 //The number of threads during scanning. Set as needed. If the returned result is not completely correct, please modify the number of threads CheckPort=135 //TCP port for detection CheckTimeOut=30 //Scan TCP timeout ReceiveIP=192.168.0.253 //Receiver IP AutoRun=0 //Auto-start at boot AutoStart=1 //Automatically run after startup 3. Receiver configuration file: SVR_IP=192.168.0.253 //Server IP WarningFile=Reminder.wav //Alarm sound file
[Note] Occasionally, false alarms occur. The reason is: when a certain machine is turned on and the standby time is about to reach or has reached the set automatic shutdown value, it automatically or manually restarts. It restarts and enters the desktop. If the machine is on standby again and no card number is logged in, the alarm will occur. If false positives occur, please right-click on the receiving end and trust. Even if you don't click trust, it will disappear automatically after a few minutes.
Useful
Useful
Useful