Haier Chuangxiang A680Camera camera driver For winxp official free version
Haier A680 laptop configuration parameters introduction:
Screen size: 14.1 inches 1280x800
CPU model: Intel Pentium dual-core T2370 Intel Celeron dual-core T1400 Intel Pentium dual-core T2390 Celeron-M550
CPU frequency: 1.73GHz 1.86GHz 2GHz
Memory capacity: 1GBDDRII
Hard drive capacity: 120GB5400rpm 160GB5400rpm
Graphics chip: SISMirage3
Operating system: DOS pre-installed WindowsVistaHomeBasic
Optical drive type: Herbalife Herbalife 24X
How to use:
First uninstall the camera driver in the device manager, and then install the camera driver you just downloaded.
The camera uses the default operating system driver, and the image is upside down. Double-click "Image Processing Device" in the Device Manager, right-click "Video Device" to update the driver and manually search the driver CD, CAMERA directory
How to insert the Haier a680 driver into the CD?
1. When the notebook computer is powered on, press the eject button of the optical drive and the tray will partially eject.
2. Gently pull out the front panel of the optical drive until the tray is fully opened. Please be careful not to touch the optical drive lens and other original parts. Make sure there are no obstructions under the pallet that could catch the pallet.
3. Hold the outer edge of the disc with the printed side facing up. Press down on either side of the center of the disc until the disc only snaps onto the tray shaft. If installed correctly, the tray shaft should be higher than the disc.
4. Slowly return the tray of the CD-ROM drive. The CD-ROM drive will start to read the directory on the CD-ROM. When the CD-ROM drive stops, the CD-ROM is ready for use.
it works
it works
it works