If CAD software is like a room, and the professional circuit design is like scattered beads, then Haochen circuit software is like a magical thread, connecting every step of circuit design in series, easily creating a secluded curtain of circuit design. Dream.
The overhead line optimization design software has complete functions and provides you with expert-level auxiliary design. The software incorporates powerful functions such as accurate wire and ground wire mechanical calculations; intelligent total station data plotting; comprehensive calibration, automatic wiring, automatic material statistics; accurate and fast pole and tower drawing.
The software is suitable for 20kv, 10kv, 380v, and 220v voltage levels; it has user-friendly operating functions; and a modular design process. Use ITL to automatically complete design work such as mechanical calculations, flat sections, and tower positioning, so that the design work that once troubled you can be completed as naturally as breathing.
The accurate, professional and fast calculation function database includes various data information databases such as conductors, ground wires, meteorological parameters, poles and towers, and metals. At the same time, the database can be added or deleted by oneself, and various types of line poles and towers can be selected from the database. Just select the conductor, ground wire model, weather zone, enter relevant parameters, and the software will automatically extract the information required for calculation in the database and complete various calculations such as stress and sag at one time. According to the settings of the starting and ending gear distances and step lengths, the gear distance range of the calculation results is intelligently controlled. TXT and Excel formats can be switched at will.
Figure 1 Draws a cross-section diagram. Use form-based input to add data of each measurement point, and automatically generate a flat cross-section diagram. The software also provides GPS data processing functions, automatically reading GPS data to generate flat topographic points; automatically calculating the mileage and elevation of each topographic point; automatically Plotting, automatic connection, and fully automatic operation make uneven and complex terrain maps instantly appear before your eyes. By setting the starting point mileage and elevation, the mileage and elevation of other terrain points are automatically calculated, and the continuous drawing of flat sections is intelligently completed.
Figure 2 The pole positioning software supports various voltage levels of 20kV and below, and provides line-to-ground, line-to-line safety distance and line margin settings to ensure that the project fully meets the design safety. The software provides engineering information and engineering tower settings, and various types of lines and towers can be selected from the database. Arbitrary arrangement, continuous pole arrangement, movement, replacement, intermediate insertion, multiple arrangement and editing functions make the arrangement of pole towers more flexible and faster. During all editing operations, the software dynamically displays the mileage and elevation of the tower insertion point, and dynamically displays the catenary connection between the two towers through color identification. The pole positioning is accurate and intuitive, and what you see is what you get.
Figure 3 The route map software can directly generate the corresponding route map through the drawn cross-sectional view, or it can directly generate the corresponding route map by reading the GPS data from the GPS positioning pole tower, and then assign values and values to the equipment in the route map. Marking can generate a tower detailed list and a material statistics table, providing detailed and clear statistics on the materials of the entire project. In addition, the software can also output budget interface files and import them into Wanlian Engineering Budget Software to directly make project budgets and realize the integration of engineering design and budget.
Figure 4 Tower Detailed Table Freely sets the content and style required to be output by the tower detailed table, such as detailed equipment models such as insulators, iron accessories, hardware, etc. The content of the tower detailed table can be very detailed or very simple, and can be directly output to Excel. format file for easy printing.
Figure 5 Material classification and statistics software can distinguish and represent the three parts of the equipment: "new construction, retention, and dismantling". At the same time, subsequent material statistics can also be classified and counted according to the three parts of "new construction, retention, and dismantling". At the same time, classification and statistics can also be carried out according to voltage levels. For a huge engineering design with hundreds of materials, the software can be used to quickly count, eliminating the need for statisticians to make subsequent classifications and distinctions, greatly saving time.
it works
it works
it works