Specify high line v2.0

"Specificational High Line V2.0" is the second development software system of AutoCAD. This software system is automated and related content in accordance with the requirements of national norms and specifications, mainly including: curve drawing, first curve drawing, inter -curve drawing, drawing high -end or specified high -end high line, according to national specifications, according to national specifications It stipulates that high -end points, curve high marks, positive and negative landform showing slope drawing, kilometers of grid drawing, diagram of diagrams, and constructing three -dimensional terrain (ie, digital ground model DTM), etc., no manual intervention is required during the period. And, because this software realizes high AI intelligence, this makes software operations simple. Huajun Software Park provides you with a standard high -line 2024 download. Friends who like to specify high lines come to China Jun Software Park to download and experience!

Introduction to high -line software such as specifications

Run the soft and hardware environment of this software system:

This software system is divided into network and stand -alone version.

1. Online version

It is also divided into the Internet and the LAN version. The Internet version is suitable for anyone to use it on anywhere, and the LAN version is suitable for companies and units.

The Internet version of this software system is suitable for a variety of mainstream browsers, and it is best to use it equivalent to the above version of IE10.0. Computers, mobile phones, virtual machines, and whole station can be operated online without installation or uninstallation. The computer screen is large, easy to operate, and recommended.

For the DWG digital topography generated by the online version, open it with AUTOCAD2006 or above.

2. Single machine version

Suitable for a single computer, full station instrument and virtual machine. Suitable for Windws7, 64 -bit system. Single -machine version uses AutoCAD2008, 64 -bit. The stand -alone version does not need to be installed, and the command is sent directly in an AutoCAD environment, which is used like usual operations.

Specify high -line software characteristics

This software system is intelligent software. All the things that the computer can do is handed over to the computer to do it.

1 outline

The regulatory high -line software system V1.0 (referred to as high lines such as specifications) is an intelligent digital topographic drawing software that does not include ground objects. This software system is automated and related content in accordance with national norms and specifications. It mainly includes: curve drawing, first curve drawing, inter -curve drawing, drawing a specified high -end or specified high -end high line, retain high -primary points, curve high notes, positive and negative landforms showing slope drawing, and the drawing of the curve. Killing grid drawing, diagram frame drawing, and building three -dimensional terrain (that is, DTM DTM).

The number of points for processing of this software system is not limited, which is only related to the user's computer hard disk configuration. The higher the configuration point, the more points, the faster the processing speed. For example, as far as the network time of this software system is concerned, the computer host is Intel i7-2600 In the environment of CPU and 8G memory, Windows 8.1 (64 -bit), the use of 2 million points is about 7 minutes, 100,000 points are used for about 13 seconds, and 10,000 points are used for about 1.4 seconds. Please pay attention to refer to this set of data.

This software system is suitable for the digital topographic diagram of any scale, but it focuses on production greater than 1: 10,000 terrain diagrams, because this part of the topographic diagram is the most widely used.

There are three main methods of using this software system. That is: setting, uploading (ie, opening) data files, submission (that is, the "one -click topographic diagram" command), the digital topographic diagram is drawn. It is recommended to use the default settings. Because the main setting items in the default settings are required to be preset according to the national norms, unless the user has special uses, it is generally not recommended to modify it.

A standard 40cm × 50cm mountain digital topographic diagram is generated by this software system. It takes about 1 minute to complete it under normal circumstances. Users must pay attention to the format of the data file as the same as the format in the settings, that is, the field order corresponds.

About the principle of setting:

If the national norms are stipulated in accordance with regulations, if there is no clear specification, if the unit is set up, if the unit is not clearly stipulated, the operator may set it on its own. But the default settings are generally used. However, if you need to generate a digital topographic diagram with special uses, you need to be modified with the consent of the technical department of the user's unit. The elements that users can set themselves are settings that are the purpose of beautification and internal use in addition to national norms and compulsory regulations, such as curve color, first curve color, color of three -dimensional terrain, and grid size. However, the content involving accuracy and specifications must first comply with relevant regulations.

After analysis, some settings have no room for altering in accordance with national norms, and this type of element will no longer be provided on the setting interface. For example, a high schedule greater than 1/1000 topography retains two decimal numbers, and a high -primary point notes that are less than the scale of the ratio retain a decimal number; for example, the slope line of the positive and negative landform length is 0.6mm on the figure.

In addition, the "Exhibition Point" command and "Election Points and other high lines" command under the single -machine version of the "drawing" menu and the "automatic selection such as automatic selection" command are the preservation function of the early version. Because some old users usually do not have a large amount of data and are used to these old functions, they are retained. Although the functions of these early versions have nothing to do with the processing points, the resources of the computer are relatively large. If it is transmitted through the Internet, it consumes greater network resources, so the online version does not provide these early versions of the retention function. Moreover, among these retention functions, except for the "selection points such as high lines", all other functions are also implicit in the "one -click topography" function.

However, the "selection point and other high lines" function has a auxiliary purpose, that is, the three -dimensional three -dimensional model (that is, local DTM observation) that can be used to observe some special local grounds from multiple places, which is equivalent to the pre -"block" function. That is, a small -scale three -dimensional observation of some special grounds quickly conducts small -scale local observations, rather than wait until the entire model is completed and then cut. Because the generation of large models generally takes a long time.

The "exhibition point" function of the stand -alone version is that there is no repeated display point, that is, if the coordinate point that exists in the figure will not be duplicated. Therefore, for the first, second orientation, control points, special points, etc., users can also save as a special coordinate file. It is also possible to concentrate the exhibition point after the digital topography is generated.

Although the operation interface of the online version and the single version is different, the generated digital topography is exactly the same as the three -dimensional DTM.