tsc244 pro printer driver product parameters
Main parameters
Product Type Industrial and Commercial Printer
Printing speed 5 inches/second
Communication interface serial port,USB2.0 interface
Storage memory 8MB, flash memory 4MB
Media specifications
Maximum outer diameter 214mm
Ribbon specifications
Ribbon length 300 meters
Other parameters
Other features Dual motor design;
Randomly comes with world -class barcode curl editing software to easily link the database;
Humanized high-end printer language TSPL-E can simulate other brands of barcode printer program languages;
Built-in resizable vector fonts;
tsc244 pro printer driver installation instructions
1. Please connect your printer to the computer and turn on the power switch
2. When the system detects the printer, the "Found New Hardware" wizard will automatically appear.
3. If the "Discover New Hardware" wizard appears, please press the "Cancel" button
4. If the installation wizard detects the printer, the installation will automatically proceed to the next step.
5. If it fails to automatically enter the next step, please check whether the printer is connected to the computer and turn on the power switch again.
6. Please check whether the driver for this model has not been installed on the system. Use the "Update Printer Driver" option to replace the installed driver.
tsc244 pro printer driver FAQ
How to use tsc244pro printer?
1. Self-test and debugging mode
After installing the label, press and hold the paper feed button and turn on the printer power at the same time. Do not release the button before the printer feeds paper, then the printer will perform the following things:
1.Correct label length
2. Print out the print head inspection pattern
3. Print out the internal setting values
4.Enter debug mode
2. Gap sensor calibration
This function is used to calibrate the label paper gap sensor. When the user replaces new label paper or initializes the printer, the label paper gap sensor needs to be recalibrated. (If the gap sensor calibration is incorrect, the error indicator light will flash red during printing). To calibrate the label gap sensor strength:
1. Turn off the power and load a blank label paper roll (paper without any logo or text on it) on the printer
2. Press and hold the pause button, then turn on the power
3. When the printer starts to feed paper, you can release the pause button. Please do not turn on or off the printer until the printer stops and the power and connection indicator lights turn green.
tsc244 pro printer driver update log
1: Optimized performance
2: We are serious about solving bug problems
Huajun editor recommends:
The tsc244 pro printer driver is an excellent software among peripheral drivers. The editor strongly recommends it to you. Once you download it, you will know how good it is. The editor has also prepared for youCanon mf4400 printer driver,Pantum p2506 printer driver,Canon imageCLASS MF4752 driver,Fuji Xerox WorkCentre 7835 driver,Canon lbp2900 printer driver
it works
it works
it works