Introduction to construction management work report
Construction management work report
1. Project Overview The 1st bid section of the 20XX annual engineering construction project of the Guangli Irrigation District in XX City is located below the No. 2 drop gate of the Guangli Main Canal. The project content is the full-section XXX cast-in-situ concrete waterproofing of the Guangli Main Canal section. Penetration and protective masonry. The planned bottom width is X meters, the canal depth is XXX meters, the canal slope is Post low-expansion plastic foam board and pour asphalt polyurethane sealant over the top. The height of the earth embankment built above the river mouth is XX meters, the top of the embankment is XX meters wide, and the embankment slope is XX meters.
Construction management work report writing skills
(1) Beginning: Summarize the main purpose of the text, get straight to the point, and name it. Summarize the overall situation of all aspects of work within a certain period of time, such as basis, purpose, estimation and evaluation of the entire work, to clarify the main purpose.
(2) Main body: The content should be rich and substantial. As the core of the text, the main situation of the work, main methods, experience gained, effects, etc. are expressed in paragraphs. Data and materials should be used to speak, and the content should be both detailed and summarized.
(3) Ending: Be specific and practical. Write down existing problems at work and put forward specific suggestions for next steps.
The editor recommends:
The construction management work report is a free template. You can download the source file for you to edit, modify and replace. Huajun Software Park also providesSelf-examination work report,Self-examination and self-correction work reportdownload.
it works
it works
it works