Introduction to the functions of DiskGenius single file version
1. Supports NTFS partitions with cluster sizes greater than 128 sectors
2. Support file writing operations of EXT4 file system
3. Support backup and restore function of EXT4 partition
4. Supports the cloning function of EXT4 partition.
5. Support the resize function of EXT4 partition.
6. Supports recovery of lost EXT4 partitions
7. Add a menu item to restart the WinPE system and run DiskGenius.
8. Add the function of creating WinPE bootable USB disk;
9. When restarting and running the software under the WinPE system, enable the "Shutdown", "Restart", "Run" and "Adjust Screen Resolution" menu items.
10. The quick partition function supports saving the current settings in the configuration file as the default partition scheme, and automatically uses the settings every time in the future.
11. Quick partition function, change the default size of ESP partition to 300MB.
12. Quick partition function supports changing the size of ESP partition.
13. Quick partition function, for GUID partition table, supports retaining a specified number of free sectors between each partition to facilitate future conversion to MBR format.
DiskGenius single file version software features
1. Sector positioning
Users can locate the sector location in a variety of ways according to their own needs, which is very convenient.
a. Search for hexadecimal numbers
1)Support multi-condition search
2) Built-in commonly used search content
3)Support wildcards
4) Supports selecting search direction: "All", "Up", "Down"
5)Support setting search offset
6) Support condition selection: "satisfies one", "satisfies all"
b. Search text
1)Support multi-condition search
2) Can match upper and lower case
3)Support wildcards
4) Supports selecting search direction: "All", "Up", "Down"
5)Support setting search offset position
c. Go to offset
1)Jump unit: byte, word, double word, quad word, sector
2) Base representation: decimal, hexadecimal
3) Relative jump mode: start (jump from the beginning), current position, current position (from back to front), end (from back to front)
d. Go to sector
1) Logical jump (LBA) requires input of "hard disk sector address" or cluster number (valid only when the opening method must be partition)
2) Physical jump (CHS) requires the input of "cylinder", "head", and "sector" parameters
e. Quickly go to the specified sector
You can quickly jump to the previous and next sectors. Move to the first and last sector.
f. Quickly move to the cursor focus
You can quickly jump to the first and next cursor focus.
2. Editing operation
After the user positions the cursor at a specific sector position, the user can view or edit the sector data at that position. The offset of the current cursor position and the hexadecimal data of the current cursor position. In the data interpreter on the right, you can also see further explanation of the position data. You can directly edit the data at the current cursor position in hexadecimal format or text format in the hexadecimal editing area or text editing area.
a. Copy and paste
After selecting the starting position of the sector data with the cursor, hold down the left mouse button and drag the mouse to the end position of the specific data to select the data in this area. You can see that the data in this area turns light blue. Click the [Copy] button to copy the area data to the system clipboard, then position the cursor to the starting position of the sector data target area to be pasted, and then click the [Paste] button to copy the data. The data in the board is copied to the target area. You can see that the copied data turns red.
b. Save and cancel
The editing operation you perform on the sector data does not immediately modify the data on the hard disk. If you want to actually modify the data on the hard disk, please click the [Save] button. Before saving the editing operation, you can click the [Undo] button to undo the previous editing operation.
Warning: After saving, the data on the hard disk will be permanently modified and cannot be restored to its previous state. Please operate with caution!
3. Others
a. Interpreted as the starting position of the partition
Interpret the sector at the current cursor position as the starting sector of a partition. If the data in this sector conforms to the data characteristics of the partition header sector, the system will automatically identify the sector size. Otherwise, the system will prompt the user to enter the sector size. The size of the partition. The interpreted partitions will be displayed in the list on the left, and the color of the logo is slightly lighter than the color of the normal partitions.
b. Byte order interpretation conversion
The scope of influence of byte order conversion is the data interpreter, and the default interpretation is Little-Endian byte order:
1) Little-Endian means that the low-order bytes are placed at the low address end of the memory, which is the starting address of the value, and the high-order bytes are placed at the high address end of the memory.
2) Big-Endian means that the high-order bytes are placed at the low address end of the memory, which is the starting address of the value, and the low-order bytes are placed at the high address end of the memory.
DiskGenius single-file version installation steps
1. Download the installation package of the official version of DiskGenius single-file version from Huajun Software Park. After unzipping, double-click the "exe" file to enter the installation wizard, select the language, and click OK
2. Read the following license agreement, click "I accept the agreement", and click Next
3. Click "Browse" to select the installation location and click Next
4. The software is being installed, please wait patiently.
5. The installation of DiskGenius single-file version is completed, click Finish to exit the installation wizard
DiskGenius single file version update log
1. Optimize content
2. The details are more outstanding and bugs are gone.
Huajun editor recommends:
DiskGenius single file version is a software that is completely fool-proof and super simple to operate. In addition, the editor also recommends it.Hard disk serial number reading tool,fat32 formatting tool FAT32formatter,Hard disk virtual partition wizard,Huahong HHD02A card reader driver,Laomaotao USB boot disk creation toolDownload and use related software.
it works
it works
it works