autocadIt is a very useful image production software. for a personautocadFor a newbie, I don’t know how toautocadDrawing arrows and dotted lines, today I will share with youautocadHow to draw medium arrows and dotted lines. I hope this tutorial will be helpful to everyone.

Introduction to how to draw arrows in AutoCAD:

Method 1: Use the polyline command.

Enter "pl" - "Enter w" - starting point "width 0" - end point "width 5" (the scale of this value can be adjusted by yourself) - drag the mouse and place the arrow to the appropriate position, or enter " Length l” - Enter the length value, such as 5, and the arrow can be drawn. As shown in Figure 1

Figure 1

　　Method 2: Use the le command.

Enter "le" - enter the starting point - enter the end point - press "esc". Note that the arrow is at the starting point, so pay attention to the direction when drawing. In addition, the arrows drawn by this method are generally smaller. At this time, select the arrow and leader, right-click, and find Properties - Find at the bottom: Arrow Size, change this value to adjust the size of the arrow.

Another: Enter "le" - enter "s". This step is setting. A dialog box will appear. In the dialog box, you can change the form of the arrow, such as a hollow arrow or something.

How to add dashed lines in autocad:

1. Here we take CAD2014 as an example. The operation of other versions of CAD is the same. Open CAD, create a new document, or open a document that requires drawing dotted lines. In order to draw a regular dotted line, you need to create a new dotted line layer, click "Format", and then click "Layers". As shown in Figure 2

Figure 2

2. Enter the layer manager, click the "New" button to create a new layer, then name it "Dotted Line", or another name, and then click "continue" under the line type. As shown in Figure 3

Figure 3

3. Enter the line type selection interface. There is no line type we want here, click "Load". As shown in Figure 4

Figure 4

4. Find the required dotted line type, select the first one here, and then click "OK" to load the line type. As shown in Figure 5

Figure 5

5. Return to the line type dialog box. At this time, click to select the line type ISO just now, then click "OK" and close the remaining interface, so that the operation can be completed. As shown in Figure 6

Figure 6

Warm reminder: The above is the best and easiest way to draw arrows in AutoCAD. You can try it, it can save you a lot of time.