GALAXY Solid State Drive Firmware Upgrade Tool (Galaxy SSD)

The GALAX SSD firmware upgrade tool (Galaxy SSD) can currently only be used for firmware upgrades. The following is a detailed GALAX series SSD upgrade tutorial. Follow the steps to successfully upgrade the hard drive firmware.

Upgrade tutorial

This upgrade tutorial (taking Tiger 120GB as an example) is only for SSD solid state drives with version 1.03 firmware. For other SSD series models, please do not perform the following operations, otherwise GALAX will not be responsible for any losses (data loss) caused.
1. Unzip it after downloading.
2. Find Galaxy SSD A.1.19.exe and double-click it (some Win7/8 users need to right-click to run as administrator) 3. Check Tiger General 120GB (Galaxy GX0120MT103-A1) and click update firmware in the lower right corner. The prompt box will After prompting the user to close other programs, press OK to start the upgrade.
4. The software displays starting update. Update in progress. It means that the solid state drive is being upgraded. It is recommended that users do not take any operations and wait patiently for the upgrade to be completed.
5. When the software pops up the message below, it is recommended that the user shut down or restart the computer according to the prompts, otherwise it may not be recognized or misrecognized.
6. Use CrystalDiskInfo to query, and the firmware version has been displayed as the SSD model applicable to 1.06:
——Golden Warrior 240G: GX0240ML105-G
——Golden Warrior 120G: GX0120ML105-G
——Warlord 240G: GX0240ML103
——Warlord 120G: GX0120ML103
——Warlord 60G: GX0060ML103;