Haechi Log Audit System

Functional features of Haezhi log audit system

​ 1 Installation equipment hardware and configuration requirements

Recommended Xeon Intel platform hardware environment

Minimum installation requirements: RAM8G, HD50G, 2 network ports

​​The Haechi audit system runs under the CentOS system. The automatic installation CD is customized according to the standard environment. Successful installation in all environments is not guaranteed.

Make sure the hardware driver can be correctly recognized by CentOS 6.9 64-bit system, and make sure the network card file is recognized as ifcfg-eth x after system installation

2. Preparation

ISO file contains CentOS6.9 operating system and audit program

Monitor, keyboard, optical drive

Burn ISO file to CD

​ 3Automatic installation

This product is installed on Linux Centos6.9 (automatic installation).

3.1 Modify BIOS

First, enter the system bios and change the first boot device to the device to install the system, usually a CD-ROM drive. (Each manufacturer has different motherboards and bios. Only examples are given here).

After changing the bios, insert the installation CD and enter the installation interface.

In this interface, select LogAudit auto install and press Enter to enter the installation. Note that the device will automatically restart after installation, and the CD will be ejected in time when restarting.

​ ​ 3.2 starts automatic installation

After entering the automatic installation, several special situations may occur depending on the differences in the hardware environment.

Situation 1: If the following interface appears, select "OK" first, then enter twice in the second interface below.

Situation 2: If it appears whether to detect the disc, select "SKIP" and press Enter.

Situation 3: If the following interface appears, it means that the hard disk needs to be formatted and confirmed, just select "YES"

Situation 4: If the following interface appears, it means that the storage device may have data, select "Yes, discard any data"

                                          If the above special circumstances do not occur, the system will automatically install the operating system, and the system will automatically restart after installation, and the CD will be ejected in time.

When the system starts again, the Haechi log audit system will be automatically installed, as shown in the following interface, just wait for the installation to complete.

After the white progress bar reaches the end, wait for about 3 minutes for the system to automatically complete the installation. After restarting again, the NLA Login: prompt will appear on the screen, as shown below, and the installation is complete.

Haechi log audit system update log

Working day and night just so you can be happier

                                                                                                                                        are all gone!