Pinming 3D construction planning software

The official version of Pinming 3D construction planning software is an engineering analysis tool suitable for engineering architects. The latest version of Pinming's 3D construction planning software can quickly convert traditional two-dimensional floor plans into three-dimensional floor plans, and can directly generate construction simulation animations. Pinming's 3D construction planning software also provides a variety of drawing design solutions. You can choose plan, two-dimensional, and three-dimensional drawing designs, and has built-in more than 300 components commonly used in drawings.

Pinming 3D construction planning software software functions

Public propertiesEdit

Modification of public attributes refers to using the left button of the mouse in a two-dimensional or three-dimensional state to select a component by clicking on the component or directly clicking on the component list, and modifying it in the component editing interface of the property bar, component mockup, or double-clicking the mockup. Component attributes, the modification at this time is for all components with the same name

Edit via edit command

Through the commands in the component editing toolbar (or menu bar) on the right, you can use editing operations such as skewing, elevation adjustment, interrupting, moving, and rotating arrays on the component. Or components such as earthwork components and scaffolding have other independent editing commands for editing.

area layout

For area layout components, specify the first point and draw subsequent points according to the command prompt until the layout is completed. Note that the last closed section must be completed with the close command of the command prompt, otherwise modeling errors may easily occur.

Terrain SettingsEdit

When editing terrain settings, we generally first make preliminary adjustments through terrain settings, such as whether to use underground water, adjust the size of the terrain grid, adjust the display accuracy, and modify the displayed materials. Generally, it is not recommended to modify it except for groundwater. Size and precision modifications will clear out previously set elevation points and the like.

Features of Pinming 3D construction planning software

Lay out cloud components

To arrange cloud components, you must first have cloud components. The source of cloud components is mainly the components you upload as cloud components.

files and downloaded cloud components.

Split cloud components

The cloud component itself cannot be modified in any way except the elevation. We can use the split cloud component to separate the cloud components.

Split the components back to their original component positions and adjust size, color, material, proportion, etc.

Generate floor plan

In the export style, we can generate floor plans for different stages by time or construction stage, such as earthwork stage floor plans, basement stage floor plans, etc.

While generating the floor plan, we can sort out the components by exporting the component list, and then export and generate the fire protection floor plan, temporary power floor plan, temporary water floor plan, etc.

Animation preview

After we set the animation time of some components, we hope to check whether there are collisions or other errors in the next few related components during animation. At this time, we can click the animation preview command in the progress association.

Pinming 3D construction planning software installation method

1. Download the Pinming 3D construction planning software V2.0.0.8495.exe program from Huajun Software Park, click Install, and start the software installation wizard.

2. Here is the installation address setting plan. You can default to D: Pinming Software Pinming 3D Construction Planning Software. You can modify it yourself.

3. Huajun editor reminds that Pinming 3D construction planning software is being installed. The installation process will be displayed in 100% form. It will take about 10 seconds or more. Please wait.

4. Microsoft Corporation needs to be configured during installation, click Accept and install

5. After the installation of Pinming 3D construction planning software is completed, you can open Pinming 3D construction planning software.

How to use Pinming 3D construction planning software

Top-level inner facade.png Exterior facade.png Inner facade.png (Top-level outer facade.png is not used anymore) Change the height and width to the same pixels.

Top horizontal elevation.png This image uses stretch mapping. It is better to maintain the commonly used aspect ratio of 1950:1000.

Upload as cloud component

After clicking the upload as cloud component command, you will be prompted to select the component to be uploaded. The selection also requires logging in. After logging in, the following upload location selection interface will expand. We can choose the location to upload to.

After the selection is completed, you will jump to the following interface, fill in the corresponding content, and the submission is completed.

Load local family

Load local family is a command to load the local family file we saved previously into the project.

OBJ model import software

First, add a new component in the component list, and then double-click the component detail area below. In the open import file panel, click Import OBJ, select the required OBJ model, and click OK

Combined components If the model in the software does not have what you need, but you do not have a ready-made model on hand, you can try using combined components to combine other components and basic components to create the component you want. For example, the station below is a component completed with composite components.

Be careful not to check "Flip YZ axis" in the OBJ export dialog box. During the export process, warnings such as "Material map cannot be found" will sometimes pop up. You need to add the file saving path of the texture yourself.

Instructions for use of Pinming 3D construction planning software

(1) If a component has multiple styles, the component style cannot be modified in the private attributes. It can be modified through the component name replacement command.

(2) Some components do not support private attribute editing, such as flowers, grass, trees, shrubs, tower cranes, scaffolding, etc.

(3) The simulation animation time of the private attribute component is consistent with that of the public attribute component of the same name. If you need to set a different progress time, you need to replace it with other components first.

(4) In the private attribute component editing interface, if you need to modify the size of the large sample, but you feel that the large sample is relatively small, you can double-click the large sample to switch between the three-dimensional viewport.

Pinming 3D construction planning software update log

1. Sweep the bug out and carry it out to the end

2. The most stable version ever

​