Multifunctional tool to modify computer machine code serial number

Computer machine code serial number modification software is a very useful digital virtual modification tool. Machine code modification software can virtually customize the hardware information on your computer, and the software will not cause harm to your computer. The software does not require you to have professional knowledge to simulate a piece of hardware information.

Features of machine code modification software

1. Strong compatibility

​​​2. Multiple virtualization

​​​3. Customizable

​​​4. Rich parameters

How to use machine code modification software

​​​1. Unzip to the root directory of C: drive;

​​​2. Run MS-DOS; and switch to the root directory of the C: drive (use cd..);

​​​3. Enter volumeid [drive letter] [serial number to be changed];

​​​4. Close MS-DOS.

​​​Note: There must be a space in the middle of the third number, that is, there is a space after volumeid and a space after the drive letter.

Frequently Asked Questions about Machine Code Modification Software

​​​1. Will machine code modification software damage computer software and hardware?​

​​​Machine code modification softwareIt will not affect the hardware on your computer, just restart the computer.

​​​Notice: Some software will generate serial numbers and registration codes based on hardware information. Your virtual operation may change your machine code, causing the serial number or registration code you normally use to not work properly.

​

​​​2. How to restore virtual hardware information?​

​​If you wantTo restore to the original state, you need to uncheck the hardware information and click OK to restore the original state.

Machine code modification software update log

​​​1. After repairing the virtual setting of partition serial number, remove the check box and uncheck the BUG that cannot be restored.