The Source plug-in is a value-added plug-in for AutoCAD that can help designers draw graphics. The source plug-in allows designers to use more functions when operating AutoCAD software, such as section drawing, modular generation of construction drawings, and block insertion. The source plug-in allows designers to have a more efficient and faster drawing environment. Next, let the editor of Huajun introduce to you how to bring up the toolbar of the cad source plug-in and the use of the cad source plug-in shortcut keys!
1. How to bring up the source cad plug-in toolbar
first step
After downloading and installing the source cad plug-in from this site, double-click to open it.
Method one
Open the CAD program, select "Tools" in the menu bar, double-click "Options"; select "Plug-ins", in the plug-in tab, find the Source CAD plug-in, click the "Settings" button, and the "Toolbar" will usually appear in the settings window
Method two
If the CAD toolbar disappears during use, use the shortcut keys to redisplay it. In CAD, toolbars can usually be turned on or off by pressing "Ctrl + 0", "Ctrl + 2" or "Ctrl + 9". You can try these shortcut keys in sequence to see if they restore the toolbar.
Method three
Switch environments. For example, the CAD working environment is "Sketch and Annotation". You can first switch it to other working environments such as "CAD Classic" and try switching back to "Sketch and Annotation".
Method four
In addition to checking the menu bar, we can also try using shortcut keys to open or close the toolbar. Use "Ctrl+F" to open or close the floating toolbar, "Ctrl+H" to open or close the grid, and "Ctrl+A" to select all objects. Try to see if the toolbar can be restored.
2. Use of cad source plug-in shortcut keys
[ddz] Enclosed space dimensioning: The program identifies the breakpoints of lines in enclosed spaces to quickly dimension them. Use this command to quickly complete the annotation of the new wall drawing, and finally adjust the details slightly. Try to keep only the wall before operation to increase the accuracy of the dimensions.
【WW】Drawing walls, wall thickness, alignment, etc. can be set with reference to p3.
[TW] Perform smart wall shearing, select an area, and automatically disconnect or connect wall lines and columns.
【WWT】Modify the thickness of the drawn wall.
【W】【T】Set wall thickness
【A】Set the alignment.
These commands will automatically create the wall layer, and only the walls in this layer can be modified.
[XWW] Draw the wall according to the axis. This axis can be a line on any layer. With "ZXW", you can draw the building exterior wall very quickly.
【WWO】Wall clearance offset. After entering the offset distance, select the wall and select the direction. Can only be used on walls in the wall layer created by Source.
[WWA] To find the central axis of the wall, select the two sides of the wall in the wall layer created by Source.
【WWF】To fill in walls and columns, just select the two sides of the wall in the wall layer created by Source or the columns in the column layer.
[ZZR] [ZZC] [ZZL] [ZZT] [ZZX] Create square columns, circular columns, L-shaped columns, T-shaped columns, and cross-shaped columns.
【A】Change the angle,
【S】Change size
【F】Change the filling status.
[ZZBZ] Select the axis in the dote layer created by Source to generate columns at the intersection of the axis.
[XXZZ] can convert closed polylines into columns and transfer them to the column layer created by Source.
The above is how to bring up the source cad plug-in toolbar and the guide to the cad source plug-in shortcut keys compiled by Huajun editor for you. I hope it can help you.
