Many people don’t know how Disc Burning Master burns system discs? Today’s article brings you a tutorial on how to burn system discs with Disc Burning Master. If you still don’t know, let’s learn about it with the editor.
Step 1: First open the Disc Burning Master and enter the main interface of the software, as shown in the figure below. Click the burning tool at the bottom of the main interface and find the function of burning disc image in the upper interface (as shown in the picture).
Step 2: After clicking the Burn Disc Image option, you will enter the picture below. Click the folder icon to first add the system .ISO file you downloaded, then put the blank CD into the optical drive (note: XP system uses CD disc, Vista and win7 require DVD disc), and finally click Next ( as shown in the figure).
Step 3: Then enter the interface to select the burning device and set the burning parameters: here you need to select the burner first (the default state is enough, and generally does not need to be changed). Then in the interface, you can set the number of burning copies, burning speed, burning method, etc. according to your own needs. After the settings are completed, click the Start Burning button below (as shown in the picture).
Step 4: Wait for burning. Please do not do other operations during the burning process to prevent errors. Burning may take a little longer, so please be patient and don't rush (as shown in the picture).
The above is the entire content of the Disc Burning Master’s system disc burning tutorial shared with you. Friends who are interested, please come and watch!
