How does GHOST32 use the computer backup system? The following is the GHOST32 backup system method introduced by the editor. Friends in need can take a look below. I hope it can help everyone!
Press the "↓" key when booting, which is the "↓" key with 4 arrows, select →DOS Toolbox → select the first item NORMAL BOOT! (HIMEM.SYS) by default, press the Enter key, and select "Start GHOST version 8.3 Manual Operation ".
First, let’s perform the system backup operation. We click Local, then click Partition, and finally click To Image. After completing this series of operations, we enter the operating system backup operation.
The first step is to select the hard drive. Generally, each computer is only equipped with one hard drive, so don’t worry about it. Just click Next. Then we come to the operating system selection interface. We installed the operating system on the C drive, so we only You need to select the first option and click "OK".
Then we need to select the drive letter where the backup file is saved (do not select the drive letter where the system is located), and then enter the saved name (usually named according to your operating system, for example, if you are backing up the xp operating system, fill in xp or ghost. Yes, this makes it easier to remember), just click "save".
Then we need to select the compression type. The "No" option means no compression, "Fast" means low compression, and "High" means high compression. No matter which one you choose, it will not affect your use. The only difference is the GHO formed. The issue of file size is that high compression ratio is high and the resulting file is the smallest, but the production time may be longer, but it is not that long, so we generally choose the "Fast" compression format.
You will then be prompted whether to create a backup, click "Yes".
The above are all the tutorials shared with you. For more gold color tutorials, you can follow the Huajun tutorial.
