Are you not familiar with how to use CAXA electronic drawing board array graphics? If you are not familiar with it, please come and learn the method of CAXA electronic drawing board array graphics with me. I hope it can be helpful to everyone.
First, open a drawing window of the CAXA electronic drawing board on the computer
On the top of the window, draw the graphics that require the array, and then click the modify button at the top of the window.
After clicking Modify, a drop-down menu will appear. Then move the mouse to find the array on the Modify drop-down menu, and click on the array with the mouse.
After clicking the array with the mouse, the array settings window will appear in the lower left corner of the window.
In the array settings window, click the downward arrow behind the circular array on the left, and pull down to select the array type.
After selecting the array type, click on the following row number. After clicking, enter an integer, then enter the array row number, and then click on the subsequent check mark.
According to the above method, enter the corresponding data in the row spacing, column number, and column spacing after the row number. The row number refers to the number of top and bottom, the column number refers to the number of left and right, and the row spacing refers to the top and bottom. The center distance between the columns, and the column spacing refers to the center distance between the left and right.
After setting the data of the array, click the left mouse button on the graphic that requires the array. At this time, the selected graphic of the array will turn into a dotted line.
After selecting the graphics that need to be arrayed, click the right button of the mouse to complete the array. After the graphics array is completed, you will see the graphics after the array.
The above is the method of CAXA electronic drawing board array graphics shared by the editor. I believe it can help everyone better understand the CAXA electronic drawing board.
