Tutorial on how to flash back to the original firmware of Ficom K2. How to flash back to the official firmware of Ficom K2. Many people are not very satisfied after flashing the firmware of Ficom K2 routers to ASUS, Pandora and others. They want to flash back to the official firmware again. Editor Here we will introduce how to flash the official firmware of Ficom K2. The first step is to enter the Breed console
1. Unplug the power supply of Ficom K2 router first.
2. Then press and hold the WPS/RESET button on the Phicomm K2 body; remember, you need to keep pressing it and cannot release it.
3. Plug in the power of the Ficom K2 router, wait for about 5-10 seconds, and release the WPS/RESET button.
WPS/RESET button on Phicomm K2 body
4. Enter 192.168.1.1 in the browser to enter the Breed Web control interface, as shown in the figure below.
Open the Breed Web Recovery Console
Step 2: Flash K2 back to original firmware
1. Download the original firmware
After testing, it was found that the V22.3.XX and V22.4.XX versions of the firmware could not be recognized when flashing back to the original firmware in the Breed Web console. However, firmware version V21.4.6.12 can be recognized and flashed back.
Unable to recognize the original firmware of V22.3 and V22.4
Below is the download address of Ficom K2 original firmware V21.4.6.12. Please download this firmware first.
2. Flash K2 back to original firmware
In the Breed Web recovery console, click "Firmware Update" -> behind the firmware selection on the right, click "Select File", and then find the official original firmware of Ficom K2 -> then click "Upload"
First flash back to V21.4.6.12
Click "Update"
Click "Update"
Then the system will automatically flash the original firmware of Ficom K2, as shown in the picture below.
Entering the original firmware of Ficom K2
Just wait for 1-2 minutes and it will be fine.
Ficom K2 successfully flashed original firmware
3. Test the original firmware
Enter 192.168.2.1 in the browser to see if you can open the settings page of Ficom K2. If it can, it means that the original firmware has been successfully flashed to this Ficom K2 router.
Phicomm K2 original firmware setting page
Okay, the above is how to flash back to the official original firmware after flashing ASUS, Pandora and other firmwares on Ficom K2. Many friends failed to flash the original firmware in the Breed Web recovery console because the wrong version of the original firmware was selected.
Please download the Ficom K2 original firmware V21.4.6.12 provided in this article, and you can flash it back successfully; then upgrade it to the latest official version of the firmware, and it will be perfect.
For more information, please click Fijim k2 flash ASUS firmware tutorial, Fijim k2 flash Pandora tutorial