PortFree Production Program is a free USB flash drive repair tool, also known as Xingshuo USB flash drive low-level formatting tool. There are still many users who don’t know how to use this software. How to use the WinXP computer U disk repair tool Portfree Production Program? If you don’t know how to use it, you can follow the editor and do it together! This way you won't be able to use it.
Specific steps:
1. PortFree Production Program is a free USB flash drive repair tool.
2. Please click "Options" in the lower right corner of the software, and the following window will appear.
3. Please select "Other" and select "Type" --> "Removable Device"
4. Please select "Capacity Correction" and select the capacity of your USB flash drive here; if there is not the capacity you want here, please click "Add" and fill in the capacity you need.
5. Please select "Flash Test" and select "Low-level Format"; there are two parameters here, one is all modules (it means low-level formatting the entire disk), the other is the normal module (it means only low-level formatting) Formatted blocks, this parameter is suitable for U disks containing bad areas)
6. After selecting according to the above method, please click "OK" to save the settings, then connect the USB flash drive to the computer, click "RUN" to start low formatting.
In addition: If the above method still does not work, then try the following settings again.
If you still remember the Vendor String (manufacturer name) and Product String (product name) of the USB flash drive, then change the values here, and then click "Run" to start low formatting.
Note: This value was previously displayed when the U disk was connected to the computer. For example: Newman USB Flash Disk is displayed when plugged into the computer.
This is a detailed introduction to how to use the WinXP computer USB disk repair tool Portfree Production Program; if you don’t know how to use this software yet, just follow the above steps and you will!
