What should I do if the Internet speed of WiFi Sharing Wizard is slow? WiFi Sharing Wizard is a network sharing tool that provides users with free WiFi hotspots. It is a good helper for surfing the Internet in our lives. However, sometimes when using WiFi Sharing Wizard, you will find that the network speed is slow. Damn it, why does the wifi sharing wizard have slow network speed? How to solve the problem of slow network speed? The following editor will introduce in detail the solution to the slow network speed of wifi sharing wizard. Please see below for the specific operation. !
WiFi sharing software area:
Introduction to the reasons why the WiFi sharing wizard’s network speed is very slow and how to solve it:
1. The problem of slow network speed is not caused by the wifi sharing wizard. It may be related to your local network speed. If you are on a campus network, it will be a big problem. You can only wait for the campus network solution to be cracked!
2. If the wifi sharing wizard is stuck when using, then check your protection software and turn off firewall, 360ARP and other restrictions, as shown in Figure 1:
(Figure 1)
3. If it is not the above reason, then you can manually reinstall the wireless network card driver:
Taking WIN7 as an example, right-click on the computer-Manage-Device Manager-Network Adapter, as shown in Figure 2:
(Figure 2)
(1) Download and install the driver software. After downloading and installing the driver wizard, open the device manager, click on the computer name above, select right-click "Scan Hardware", and then open the driver wizard, as shown in Figure 3:
(Figure 3)
Note: Ralink is a wireless network card driver, and Intel is an Intel driver, so it does not need to be installed. Generally, the name of the wireless network card driver is based on the wireless network card. Click to download and install the Ralink wireless network card driver.
|
Software name: |
Ralink RT2860 USB wireless network card driver 5.1.24.0 WHQL version |
|
Software size: |
14.20MB |
|
Download address: |
l |
(2) After completing the installation according to the steps, right-click the computer desktop - Management - Device Manager - Network Adapter, and a wireless network card just installed will appear. Open the computer network connection, and a wireless network connection will appear, as shown in the figure. 4 shown:
(Figure 4)
3. If there is a wireless signal around, click on the lower right corner of the computer to connect to the wireless network, as shown in Figure 5:
(Figure 5)
4. If it still doesn't work, do the following: Open Computer and Sharing Center - Change Adapter, right-click on your network card status, check the amount of data received and sent, both must be balanced and greater than 50,000, otherwise it is recommended The system has been changed, as shown in Figure 6:
(Figure 6)
The above are the reasons and solutions for the slow network speed of the wifi sharing wizard introduced by the editor to users. I hope it can help everyone!
The editor recommends:
What should I do if the wifi sharing wizard fails to start and displays a 1005 error?
What should I do if the wifi sharing wizard fails to start and displays 1401?
What is the reason why the webpage cannot be opened using wifi sharing wizard?
