AMpe toolbox

AMpe toolbox is a full-featured PE startup toolbox. The AMPE toolbox has a simple interface and fool-proof operation. All AMPE toolbox uses message startup mode, which has better compatibility. Most of the built-in gadgets come from the Internet. Welcome to download and use

Function introduction

Function 1: Make U disk hidden partition by default, anti-grid, optional Win2003PE and Win7PE, diskgenius, manual Ghost is also optional in the DOS boot menu

Function 2: Install in the current system and reinstall the system, for backup, restore and maintenance purposes

Function 3: Make a boot disk in iso format and mass-produce or engrave it as needed

Function 4: Create a startup file saved in Fba format, with an Fba writing tool attached (you can also use it to erase the U disk and restore it to default)

How to use

1: AMpe writes to U disk (USB2.0 interface)

2: Copy the system image to a USB flash drive (you can use the USB3.0 interface to copy it in much faster)

3: Partition, if there is a partition, you can skip it and format the system disk.

4: Install the system according to the system image format.

A: Install to the hard disk and start, the function is the same as... Novices can refer to: Basic tutorial on using AMpe toolbox

Instructions for installing to hard disk and booting

Support xp/Win7/Win8.1/Win2008/Win2012/Win10

System property settings after installing to the hard disk (supports normal installation of backup and recovery system, or if there is a problem with the system, you can boot into PE maintenance and reinstall the system):

Change log

AMpe toolbox v7.1 is a small update, mainly to optimize startup speed. x64-bit PE adds nvme driver support, streamlines redundancy, removes some uncommon tools, and some built-in tools have been updated and adjusted.