Ghost image installer

Ghost installerBased on the Ghost 11 kernel, the operation is simple and fast. Users can install the Ghost system image under Windows without burning a disk, starting a disk, or setting a BIOS. It supports NTFS, Vista, and SATA hard drives.

Running platform: Windows XP/2003/Vista/2008/7
Operating Instructions:
1. Back up the system: Select "Backup" - click ".." - select the save directory - execute
2. Restore the system: Select "Restore" - click ".." - select Ghost image - execute
3. Restore from ISO: Select "Restore" - click ".." - select the iso file - select
Ghost image - execution
4. Restore from the network: Select "Restore" - click ".." - browse the machines on the network -
Select Ghost image - Execute
5. Install the system: The Ghost image (XP.GHO) is in the same directory as this program - execute
6. Enter pure DOS: select "DOS" - Execute - Manual Ghost

Options:

1. Disable IDE: -noide parameter. If you cannot enter the Ghost interface, please change this option.
2. Startup module: If booting fails, please select another startup module.
3. Define the kernel: Ghost.exe can be in the same directory as this program; otherwise, the built-in
Ghost 11 kernel.
4. PE environment: Give priority to using Ghost32.exe in the same directory.
5. Rebuild MBR: Used to remove ghost MBR boot sector viruses.
Other notes: The path to the Ghost image (including the file name) cannot contain Chinese characters.

How to use Ghost installer

Run the ghost installer, select the partition to be installed, and select the ghost image to be installed. Then start. Then the computer will restart. Do not move after restarting. It will enter the installation interface. Check whether your hard disk is IDE. If not, choose to block IDE. If yes, choose to enable IDE. Then click OK to start the installation. Then it will restart and enter the system driver. Install it and then you can enter the system.