ZTE U880 flash tool

This sectionZTE u880 flash toolA tool to flash bin and upgrade ZTE u880.

How to flash bin on ZTE u880

　　Press "Volume+" and "Power button" at the same timeEnter blue screen mode (displayed on the phone"Flash Mode"), and then connect the data cable to the computer.

The computer will prompt that new hardware has been found, and you must install the driver according to the prompts. (If the computer does not prompt, please open the device manager to install it manually. (When you plug in the phone and open the device manager, there will be a yellow exclamation mark. Right-click and select Install Driver. Do not choose to automatically search for installation, but select the specified location to install. The driver is in the file you just installed. ) in the downloaded attachment.

After installing the driver, unplug the data cable, remove the battery, mobile phone card, and memory card.

In the decompressed folder, double-click "Upgrade Tool" and it will prompt "Select the image file to be downloaded". Click "Open" to select the decompressed U880.bin.

Turn off the phone, take out the battery, phone card, and memory card, and plug in the data cable. If prompted to install the driver, follow the above method to install the driver.

The upgrade tool will prompt that the device has been plugged in.

Click "Start" as prompted and flash U880.bin

At this time, the gray "Start" button of the flashing tool software will become clickable, and then click "Start" to start flashing. The progress bar will run twice. After the second time, it will prompt "Download Complete" before unplugging it. data cable.