Blue screen repair tool

The Huajun Software Park channel provides you with downloads of blue screen repair tools and official downloads of blue screen repair tools. The blue screen repair tool is a convenient and practical blue screen repair tool that can solve the system blue screen problem with one click. The blue screen repair tool software is small, takes up little memory, is simple to use, and can solve most blue screen problems on Windows computers.

How to install blue screen repair tool

​ ​ 1. First download the blue screen repair tool package from this site. After the download is completed, double-click the exe application to enter the installation wizard interface. Uncheck the [Set 2345 Navigation as Home Page] option in the lower left corner. After the selection is completed, click [Next].

2. Enter the installation location selection interface. You can click [Install] and the software will be installed by default, or you can click [Browse]. In the opened installation location selection interface, you can select the installation location of the blue screen repair tool. After selecting, click Just install it.

3. The blue screen repair tool is installed. Click [Finish] to use the blue screen repair tool.

Computer blue screen solution

      Method One: Software Repair

1. You can download and install the blue screen repair tool software from this site. After the installation is completed, run the main program on the desktop. After opening it, click to start the repair.

​​ 2. Secondly, you can also use the computer repair tool that comes with 360 Security Guard! After a blue screen occurs, the following prompt box will appear when you start it for the first time, prompting you to repair your computer! Click Repair Now to enter the repair program!

3. If there is no prompt, you can open 360 Security Guard and select the "Computer Rescue" option!

​​ 4. After entering "Computer often blue screen" above the computer rescue field, click "Find Solution", the solution to this problem will be displayed below, click "Repair Now"

5. 360 Security Guard will first upload the blue screen record log. This file is located in C:windowsminidump and will be uploaded soon.

​​ 6. After uploading the log, the system automatically analyzes and repairs it. You only need to click Next to complete the entire repair process!

      Method 2: Automatic system repair

​​ 1. Restart after blue screen. Press and hold F8, enter the operation options, and select "Repair Computer"

2. Just like the system recovery tool, select "Startup Repair"

​​ 3. The system automatically starts the repair program. Generally, problems such as lost system files can be repaired directly. Solutions that cannot be repaired directly will also be provided!

​​ 4. Click Finish. The system repair is completed and restarts normally. General problems such as illegal shutdown can be solved!

      Method 3: Repair it yourself

​​ 1. Press and hold the Tab key when the system starts, enter the startup options list, and select the system memory diagnostic tool! Use the system tool to detect whether there are errors in the memory!

​​ 2. Disassemble the computer, pull out the memory module, wipe the metal contact with the copper foil with an eraser, and then reinsert it or change the card slot!

3. Check whether the temperature of the machine is too high? You can check whether the cooling fan of the machine is running normally, and then open the back cover of the chassis to facilitate heat dissipation. At the same time, use a hair dryer to clean the dust inside the case.

Blue Screen Repair Tool FAQ

      What are some common blue screen codes and their solutions?

      1.y0x0000000A:IRQL_NOT_LESS_OR_EQUAL

Error analysis: It is mainly caused by problematic drivers, defective or incompatible hardware and software. From a technical point of view, it indicates that there is an internal process request level (IRQL) that is too high in kernel mode to access something that it does not have permission to access. memory address.

      2.0x00000012:TRAP_CAUSE_UNKNOWN

​​ Error analysis: If you encounter this error message, it is unfortunate because the result of the analysis is that the cause of the error is unknown.

Solution: Since Microsoft can't help, you have to rely on yourself. Please carefully recall when this error occurred; what operations you did on the system when it first occurred; and what operations were being performed when it occurred. From these Find out possible causes from the information, and then select corresponding solutions to try to eliminate them.

​​​3.0x0000001A:MEMORY_MANAGEMENT

Error analysis: This memory management error is often caused by hardware, such as: newly installed hardware, problems with the memory itself, etc.

Solution: If it appears when installing Windows, it may be because your computer does not meet the minimum memory and disk requirements for installing Windows.

​​​4.0x0000001E:KMODE_EXCEPTION_NOT_HANDLED

​​ Error analysis: The Windows kernel detected an illegal or unknown process instruction. This stop code is generally caused by problematic memory or similar reasons to the previous 0x0000000A.

Solution:

(1) There is a problem with hardware compatibility: Please refer to the latest hardware compatibility list mentioned above to see if all hardware is included in the list.

(2) Problematic device driver, system service or memory conflict and interrupt conflict: If the name of the driver appears in the blue screen message, please try to disable or delete the driver in the installation mode or recovery console, and disable all Just installed drivers and software. If the error occurs during system startup, please enter safe mode and rename or delete the files indicated in the blue screen information.

(3) If the error message clearly states Win32K.sys: It is most likely caused by a third-party remote control software, and you need to shut down the service for this software from the recovery console.

(4) Occurs when restarting for the first time after installing Windows: The most likely suspect is that there is insufficient disk space in the system partition or there is a BIOS compatibility problem.

(5) If it occurs when closing a certain software: It is very likely that the software has a design flaw, please upgrade or uninstall it

Comparison of blue screen repair tools and similar software

Windbg is a classic Windows system blue screen analysis and repair tool. It can analyze and solve problems such as blue screens and program crashes (IE crashes) by analyzing and locating DMP files. The Blue Screen Repair Tool is a convenient and practical blue screen repair tool that can help you repair computer blue screens with one click. The software is simple to operate and easy to use.

Windbg blue screen analysis and repair tool download address:http://softwaredownload4.com/soft/620299.htm

Blue screen repair tool update log:

1. Fixed several bugs;

2. Optimize details;