FurMark

FurMarkIs a lightweight but very intensive graphics card/GPU stress test on the Windows platform. This is also a quick OpenGL benchmark. FurMark baking machine software is not only easy to use, but also free to use. It is very suitable for friends to use for testing computers. FurMark also supports multipleGPUDisplay the temperature curve separately. If you are worried that the language of this software is not recognized by you, then you can rest assured that this software also supports setting to Simplified Chinese. Huajun Software Park provides you with free download of FurMark2024. Friends who like FurMark come to Huajun Software Park to download and experience it!

Furmark FAQ

1. Is the FurMark oven harmful to the graphics card?

FurMarkThe baking software will cause physical damage to the computer's GPU, so you need to pay attention to this.

2. How to check the results using the baking machine software Furmark?

1. Test the stability, temperature and real performance of the graphics card.

2. Check the total number of frames (which can be understood as the average number of frames) within the same period of time currently running, which can reflect the true performance of the current graphics card.

3. Checking donuts is relatively reliable. If your graphics card can run multiple consecutive donuts without any errors within an hour, and the maximum temperature is lower than 80°, you can consider it as the current graphics card. It's qualified.

4. If your graphics card is overclocked and can still run the donuts at that set of frequencies within an hour without error, it means that there is no problem in daily use of some applications.

3. How long does it take for the Furmark test to be completed?

Fifteen minutes is almost enough. If possible, 30 minutes is better.

Furmark software features

In stability test mode, individual temperature curves can be displayed for multiple GPUs;

During the stability test, you can press the "I" key to turn off/on the information display on the screen;

During the stability test, you can press the space bar to turn on/off the rendering mode;

Supports 800x600 and 1920x1080 resolution modes;

Supports Bulgarian, Polish, Spanish, and Castilian options;

FurMark installation steps

1. First find the "Download Address" on this page and select any address to start selecting. Download the Furmark software package locally and double-click to unzip it to find the .exe format program and run it. As follows: In the following interface, we can directly click [next] to start the installation.

​ ​ 2. After starting the installation, you will enter the Furmark installation agreement interface. In the installation agreement interface, we need to understand the content of the agreement and agree to the agreement before you can continue to click [Nex]】Install.

3. Continue the installation and enter the Furmark file installation setting interface. In this interface, we need to set the specific storage path of the Furmark file. If you want to set up, click [browse...] to enter the setting interface. If you don't want to, you can skip this step and click [next] to continue the installation.

​ ​ 4. Continue the installation and you will enter Furmark's additional task selection interface. In this interface, we can choose whether to create the following two options. These two options are created to facilitate the next time you open the Furmark software. The former is to create a shortcut on the desktop and the latter is to create it in the quick launch bar. After selecting, click [next] to continue the installation.

5. Next we will enter the Furmark installation information confirmation interface. This interface contains some previously set information. We only need to confirm that it is correct before clicking [install] to install. If some of your information settings are incorrect, you can click [back] to return to the previous step and reset.

​ ​ 6. Finally, the Furmark software is installed, we only need to click [finish] on the following interface to close the interface. There are two options you can choose before clicking the Finish button, the first is to run the software directly, and the second is to run the instructions for using the software.

How to use FurMark

FurMark settings

1. To use the software, we must know the introduction of the software. However, the software we installed has an English interface, so how to set up the Chinese version of Furmark? See the following Furmark Chinese version setup tutorial.

2. Open the Furmark software and find the [lang] option and select the drop-down [Chinese-S] to set it to the familiar Chinese interface. You can use the software after setting up the Chinese interface.

FurMark baking machine tutorial

1. You need to select [Stability Test] and [Extreme Torture Mode] and click the [Start] button below to check the stability of the graphics card.

2. During general testing, a test window will appear, which contains the temperature curve of the graphics card, allowing you to understand the current working status of the graphics card at any time. If you want to test whether the graphics card is overclocked successfully, you need to continue the test for more than ten minutes to be effective, and there must be no external interference during these ten minutes. It is enough that there are no abnormal prompts such as crashes or screen blur during the test. You can also lower the frequency of the graphics card slightly until the test is over.

The above is the correct baking machine tutorial from furmark.

Furmark update log

​​​Fixed a bug in AMD Radium Dragon GPU detection. !

​​Update: GPU Shark 0.28.1.0. !

​​Update:ZoomGPU 1.36.1 (GPU monitoring library)