Sadptool (SADPTOOL)

Hikvision Equipment Network Search-SADP is a tool software for searching for online devices. This software can search for all online devices in the same local area network, and can display the relevant information of the device. SADP It can also be used to modify the network parameters of the device and the default password of the restoration equipment.

Sadptool function features

Search for the online device in the network segment where the software is located. Modify the network parameters of the device: including IP address, port, subnet mask, gateway, etc.

Note: SADP software cannot search for online smart devices.

Online device detection:

After the software starts, a broadcast package is sent to the local area network where the computer is located every 15S to detect the online status of all devices. All online device equipment types, port number, IP Information such as addresses, software versions will be displayed on the "online detection" interface.

Click

The button can expand the "online detection" interface and hide the "modify the network parameter" interface. Click

The button can expand the "modify the network parameter" interface.

Note: The software can be detected after the device is launched 15s; it can only be removed from the online list after the device is offline 45s.

After opening the software, you can also click

The button refresh the list manually. Note: Click the device information next to the device information

or

The button can sort the corresponding device information.

Modify network parameters:

1. Click the device that needs to be modified in the selection. At this time, the network parameters of the device will be displayed on the "modification network parameter" surface on the right side of the software

2. Edit network parameters, such as: IP address, gateway, etc.

3. Enter the device administrator password, click

The button is saved and modified.

4. After the preservation is successful, it will be prompted to "modify the parameters" success.

Restore device default password:

1. Contact the relevant technicians to get the serial code.

2. Enter the sequence code obtained, click

Buttons, restore device default passwords.

3. After success, it will be prompted that "the initial password is successful."

Promise:

In order to simplify the description in this manual, do the following agreement:

1. Equipment network search software is referred to as software for short.

2. Network hard disk video recorder, hybrid network hard disk video recorder, video server, NVR, IP carera, and IP dome uniformly referred to as devices.

3. Click as a left mouse button to click; double -click the left mouse button double -click; right -click as the mouse right -click.

4. Some pictures are a schematic diagram, please use the software's actual interface.

Sadptool update log (SADPTOOL)

1. Optimized some functions

2. I solve a lot of unbearable bugs