Huirong SSD mass production tools

Huirong SSD mass production toolsThe official version is a repair tool suitable for computer solid state drives. The official version of Huirong SSD mass production tool is used for mass production of solid state drives using Huirong SM2250AB chip. Of course, it can also be used to upgrade firmware and other functions. andHuirong SSD mass production toolsWe can also provide a package solution including PCB design, main control, firmware, etc. Huajun Software Park provides download services for Huirong SSD mass production tools. Everyone is welcome to download and use them!

Introduction to Huirong SSD mass production tool software

SSD master control, from Silicon Motion (Huirong Technology) was founded in the United States in 1995 and is headquartered in Hsinchu, Taiwan. The official website is here. Looking at their introduction, they say that Huirong is a global NAND and professional radio frequency IC company and a leader in memory card and flash drive control chips. Or Samsung 4G The main supplier of LTE Transceiver chips.

Huirong Technology is not involved in SSD production and only provides master control. If manufacturers are willing, they can also provide a package solution including PCB design, main control, firmware, etc. Of course, manufacturers can also choose to only buy the main control and handle the rest by themselves.

Huirong SSD mass production tool installation steps

​ ​ 1. Download the Huirong SSD mass production tool from the Huajun Software Park and get a software compressed package.

​ ​ 2. Then decompress the software compressed package and obtain sm22XMPToolK1222.exe.

3. Finally, double-click to open sm22XMPToolK1222.exe and you can use it.

Instructions for use of Huirong SSD mass production tools

​ ​ 1. Connect the product to the computer using the card opening tool (as shown in Figure 1), double-click the left mouse button to open the card opening software JMMassProd;

​ 2. Click Load INI to select the configuration file corresponding to the model;

3. Click the "Test Items" page, check the test items as shown in "1" in Figure 4, and then click "Flash Module Test" to check the items shown in "2";

​​ 4. Click "Preformat" and then select "Factory+New BB" (Figure 5). (If the Flash is brand new and original, select "Factory Default+BB", if there are too many bad blocks in Flash and the card cannot be opened, select "Erase Search");

5. Click "Download" and check the red box in the picture as shown;

​ 6. Click the “Device Setting” page to modify the product name and serial number;

​​ 7. Click the “Flash Setting” page and click “Auto Detect" button detects the FLASH model, channel number, and Bank number, and confirms whether they are consistent with the production order;

​​ 8. Click "START" in the lower left corner to open the card. After the card is opened, it will prompt "Pass" and a green window will appear;

Comparison of similar software

​​​Anguo U disk mass production toolThe official version is a mass production tool designed for USB flash drives created by Anguo. Anguo U disk mass production tool can support more U disks, support more new flash memories, support the mass production of U disk boot disks, and support the repair of various problems with U disks. Anguo U disk mass production tool can also solve problems such as U disk cannot be opened, cannot be formatted, cannot be used, etc.

​​​HUC2168U disk mass production toolThe official version is a professional and excellent U disk mass production auxiliary tool. The official version of the HUC2168 U disk mass production tool is specially used for mass production repair of U disks with the main control model HUC2168, and can partition the U disk. The HUC2168 U disk mass production tool can set LED status and manufacturer information, and supports batch production of boot disks. It is simple to operate and has practical functions.

Huirong SSD mass production tool update log

​ 1. Support Samsung 21NM 2KB SLC

K9K8G08U0E and K9WAG008U1E change FW architecture to cache mode

2. Support Samsung 19nm MLC

3. Support Toshiba 24nm SLC