pci simple communication controller driver

PCI simple communication controller is a rare but popular remote controller. The pci simple communication controller driver is the most commonly used and practical driver in computers. It is a Modem driver that can solve PCI problems when used in computer drivers. question. What the editor brings to you is the win7 version of the pci simple communication controller driver. I hope you will like it.

PCI simple communication controller driver software instructions

​ ​ 1. Download and unzip it to get the two drivers for win7/xp version;

​ ​ 2. Click "My Computer" - right-click "Device Manager" - find "PCI Simple Communication Controller", and click Properties in the drop-down menu;

3. The pci simple communication controller properties window that is opened again shows that the driver of the device has not been installed. We click: Update driver;

​ 4. Click again: Browse my computer for driver software (R)

5. Select (L) from the computer’s device driver list, and then click: Next (N);

​​ 6. System equipment, then click: Next (N);

​​ 7. Next, we left-click on (standard system equipment) in the manufacturer column of the box (note: it must be the standard system equipment delineated by the red line, the other one will not work!), and then click: Next (N);

​​ 8. At this time, a warning window will pop up: Update driver warning window, let’s ignore it, just click Yes (Y);

​ 9. At this time, the message "Windows has successfully updated the driver file" will appear. We click: Close;

10. Return to the device manager window, and the PCI Simple Communication Controller under other devices has been successfully installed.

How to use pci simple communication controller driver

​​​Installation prerequisitespieces

​ ​ 1. A dial-up Internet Modem (computer modem) must be installed on the computer motherboard [1].

2. The installation sequence is to install the motherboard driver - install the graphics card driver - then install the sound card - network card

3. Internet access hardware equipment with a transmission rate of at least 56K per second. In this case, a modem must be installed in the computer case. If the driver is not installed, the computer will automatically recognize the modem as a PCI simple communication controller.

​​​After installation

Now the motherboard no longer has the above problems. After installing the Intel(R) HECI device driver, "Intel(R) Management Engine Software" will appear in "System Devices" under "Device Manager", so it is normal!

pci simple communication controller driver frequently asked questions

​​​The computer prompts that there is no PCI simple communication controller solution:

​ ​ 1. Install the MODEN driver. You can turn off the computer and pull it out to see the chip model, and then go online to download the driver.

​ ​ 2. Dismantle. If you have installed ADSL broadband, you can dismantle it. If it is integrated into the motherboard, you can block the modem in COMS.

​​​What should I do if a yellow exclamation mark appears on the PCI Simple Communication Controller?

​ ​ 1. As shown in the picture, the "PCI Simple Communication Controller" device appears in the device management of the computer with a yellow exclamation mark next to it.

2. At this time, you can go to Baidu to search and install driver installation software such as "Driver Wizard", "Master Lu" and other software. Use software to automatically install drivers. Take "Master Lu" as an example. After installing and running Master Lu, click the "Driver Detection" button on the main interface.

3. After software detection, the discovered devices for which drivers need to be installed will pop up.

​​ 4. At this time, you can click the "Install" button on the right side of the corresponding device, and the software will automatically download and install the corresponding driver. If you find that multiple devices need to install drivers, you can also click the "One-click installation" button. After installation, you generally need to restart your computer.

5. After restarting the computer, the "PCI Simple Communication Controller" device with a yellow exclamation mark no longer appears in the computer's device management.

​ 6. There is an additional device detected by Master Lu in the system device list. It shows that after installing the driver, the computer correctly recognized the device. The original "PCI Simple Communication Controller" is just a general name for this type of equipment.

​​ 7. If you are interested, you can right-click the mouse on the device. Then use the left mouse button to click the "Properties" button in the pop-up menu. View the details of this device.

8. It can be seen from the device properties that the device is located on the PCI bus.

pci simple communication controller driver update log

1. Fixed several bugs;

2. Optimize details;