Source CAD plug-in

Source CAD plug-inThe official version consists of aCADA fully functional plug-in tool. The latest version of the Source CAD plug-in has many built-inDrawingfunction, applicable toarchitectural design, related auxiliary drawing, decorative design and other fields. The Yuanquan CAD plug-in supports operations such as automatic axis dimension lines, automatic wall drawing, and self-made fill patterns. It runs stably and is compatible with various CAD software.

user community

Source CAD plug-in bar

Introduction to the functions of Yuanquan CAD plug-in

      Automatic axis number dimension line

                                                                             Only one step: select the axis

● Automatically arrange the axis number and two dimension lines according to the selected axis

       ● Does not affect otherLayers

      Wall door/window AD/WD

● Click on the wall line of the door/window

● Shake the mouse to confirm the opening direction, OK, done!

       ● You can select the door opening width by pressing the "W" key

       ● You can select the door stack width by pressing the "D" key

      Sliding doors and windows left and right VW

       ● Selectdoors and windows, select the left part of the door and window and move it to the left, select the right part and move it to the right

● Enter or click the moving distance to complete the translation of doors and windows!

      Paint automatic wall

       ● Draw a flat wall just like a straight line

● ● The wall inside the column will be trimmed when it hits the pillar.

● ● The intersection with the wall will be trimmed

          ● Press the “W” key to select the wall thickness from the list

       ● Does not affect other layers

      Smart wall clipper TW

● Just one step: select the range of wall studs to be trimmed

● The wall inside the column is trimmed

       ● The intersection between the wall and the wall is trimmed

       ● Does not affect other layers

Source CAD plug-in shortcut keys

[Door and window tools] TDZ yq_cwindow_replace; Corner window replacement style

[Door and window tools] MKX yq_doorsill; Threshold line management

[Door and window tools] MDX yq_dooropening; Door opening line management

[Door and window tools] xWD yq_line2window;Line to flat window

[Door and window tools] CW yq_width_windoor; Modify the width of doors and windows, and automatically modify the wall stacks

[Building Component] LTF yq_escalator; draw escalator plane elevation

[Building components] LTJ yq_staircase_plan; Draw a rectangular staircase plane

[Building components] LTA yq_arcstair_plan;Draw arc stair plane

[Building components] DTJ yq_lift_plan;Draw the plane of the elevator car

[Decorative component] YG yq_chestplan; Wardrobe plane

[Decorative component] CLP yq_curtainplan; curtain plane

[Decorative component] SGX yq_plasterstringplan; Offset plaster line plane (offset polyline)

[Decorative component] GZ yq_cupboardplan; Simple cabinet plan

[Decorative component] GZE yq_cupboardelev; Simple cabinet elevation

[Building Symbol] aZH yq_auto_axis_dim; Select the axis to automatically arrange the axis number and two dimension lines

[Building Symbol] ZH yq_symbol_axis_c; Continuously draw axis numbers and two dimension lines according to the axis

[Statistical Tool] aBH yq_autoserialnumber; Automatic numbering (can be used for rooms, parking spaces, etc.)

[Statistical Tools] Kbg yq_emptytable; Draw an equal-width empty table

[Statistical Tools] bgZ yq_text2center; Center the table cell text (number)

[Statistical Tools] tMJ yq_calc_cellarea; Statistical area,

Source CAD plug-in installation instructions

                  Unzip the Yuanquan Architectural Software installation package downloaded from Huajun Software Park, then click the one-click installation program setup.exe, and follow the prompts to select the AutoCAD user profile (Profile) that needs to be associated to simply complete the installation and setup process.

If the above method fails to install, please drag the sysinstall.vlx file into the AutoCAD drawing area to complete the installation of the source building;

It is strongly recommended to install AutoCAD extension tools (AutoCAD express tools). AutoCAD 2005 and above already come with this extension tool, just choose to install it when installing AutoCAD;

If the startup file sysacad.lsp conflicts with your self-written program, you can delete it directly after installation. At this time, you should add the source building startup file yqstart.lsp to the AutoCAD startup group;

The installation method in Tianzheng building (5.0-8.5) environment is the same as above.

Source CAD plug-in system requirements

​​​Memory: 128mb memory

Hard disk: 50mb free hard disk space (the software takes up about 10mb);

Operating system: Windows 98, Windows 2000, Windows XP, Windows Vista, Windows 7, 8, 10, etc.;

Source CAD plug-in update log

● Support AutoCAD 2023 (32bit/64bit);

● Support AutoCAD 2022 (32bit/64bit);

● Modify the "Automatic Numbering (aBH)" command and add the "Filter Block" function to the "Element Numbering" option;

                   ● Modify the "Divided Dimensioning (ddST)" command so that the total length is the measured value and no fixed string is written;

● Fixed the bug that the gypsum board would be offset when launching the "Light Steel Keel Partition Wall" command under the "Decorative Components" panel;

                                                                                          Corrected the "Calculate output area (mj)" command to be compatible with flattened 3D polylines;

                                                                                             Modify the " Flatten Primitives (z0) / Flatten Blocks ( bbZ0)" command and add the " Correct Stretch Direction" option;

●                                                                                                 Fixed the bug that the alphabetical number cannot be incremented in the "Facade Index Number 4 in 1 (i0)" command;

● In the user system configuration file config.txt, add the [Fixed Furniture Layer] setting item;

● Modify the "wardrobe plane (yg)"/"furniture and sanitary ware plane layout (JJ)" command,

The wardrobe is built on the "fixed furniture layer", or you can choose the "movable furniture layer";

● Modify the "Brush. Match dynamic block attributes (ssD)" command to cancel the restriction on blocks with the same name and match only by tags;

           ● The prefix of automatically generated tiles can be specified in "userstartup.lsp";

● Modify the "Select existing pattern as template fill (TCT)" command,

"Virtual frame filling/replacement filling/offset filling/point enclosure" are all optional on the command line;

                                                                               Corrected the "Set shortcut key for switching layers - Wildcard matching layer list (erW)" command,

The wildcard character supports comma ",";

●                                                               Corrected the "Wireframe to Window Elevation (WDD) command, so that when the layer is filled in the blanks, it can be drawn on the current layer;

● Modify the "Hole Symbol (KD)" command and add the "Crossline Hole Symbol" option;

                                                                    Fixed the bug in the "Draw Frame (tk)" command when rotating the coordinate system;

                 ● Modify “Rotate elevation view direction (vvR)” and add a new item “Input view rotation angle”;

                                                                              “Q5 Miscellaneous Command Panel” is modified as follows:

Modify the "Find Area/Perimeter/Wall Area (wmj)" command to add output summary information;

                                                                    “Q6 Miscellaneous Command Panel” is modified as follows:

                                                                                            Added a new series of commands "Layer System Stratification".

Special instructions:

Hello, the software you are about to use is an auxiliary tool and may be intercepted and checked by major anti-virus software. There may be risks in using this software. Please pay attention to avoid it. If you want to continue using it, it is recommended to close various anti-virus software before using it. .

Attached is the software package decompression password: softwaredownload4.com