Xiangyuan Control Regulations

Xiangyuan Control 7.0 is a comprehensive, professional and practical cad2008 tool. Xiangyuan Control 7.0 supports both 32-bit and 64-bit systems. It was personally tested and installed on the AutoCAD2008 platform and the function is normal. Xiangyuan Control Plan 7.0 is suitable for the design and management of urban zoning planning and urban regulatory detailed planning. Download of Xiangyuan Control Regulations is provided for free!

Xiangyuan Control RegulationsSoftware introduction

Xiangyuan Control Planning is a set of urban control detailed planning auxiliary design software developed based on the AutoCAD platform. It is suitable for the design and management of urban zoning planning and urban control detailed planning, including functions such as municipal pipe network design, sunshine analysis, earthwork calculation, land use analysis, drawing production, and special design. It is based on ACAD2008-2019, ZhongwangCAD 2018 is a graphics support platform that fully supports Windows XP, Win7, Win8, and Win10 operating systems.

Xiangyuan Control RegulationsFunction module

​ 1. Topographic map drawing module

2. Draw road system diagram module

3. Drawing map and control indicator map module

4. Draw general floor plan module

5. Draw landscaping diagram module

​ 6. Draw pipeline comprehensive diagram module

7. Draw earthwork calculation diagram module

8. Drawing plan module

9. Draw analysis diagram module

10. Drawing inspection module

11. GIS import and export module

12. Toolset module

Xiangyuan Control Regulation 7.0 version information:

About Xiangyuan Control 7.0 software information:

Xiangyuan Control RegulationsVersion features

   1. In terms of system

​​ 1. The Chinese version of Xiangyuan Control Regulation 7.0 adds support for Windows 10 systems.

​​ 2. Add support for AutoCAD 2016 version.

   2. In terms of terrain

​​ 1. The "Land Assessment" command is added to the terrain analysis to assess the construction conditions of the planned land.

​ ​ 2. Add the commands to generate Thiessen graphics and generate the largest inner circle of polygons.

​​ 3. Add the "Draw Watershed Line" command.

​​ 4. Added the command to generate "flood submerged range".

5. Modify the "Aspect Analysis" command and add a legend for generating aspect analysis.

   3. In terms of roads

​ ​ 1. Xiangyuan Control Regulation 7.0 adds the drawing of 5-block roads and 6-block roads in terms of roads.

​​ 2. The road generation command has been modified to solve the problem of incomplete window display under Windows 10 system.

​​ 3. Modify the "horn widening" and "harbor parking" commands to add buffering curve arcs. For the bell mouth widening command, the parameters supporting the widening of adjacent ends of the same arc are different.

​​ 4. Fixed the problem of serious errors in the road "arc tangent" command.

5. Added the "Road Attributes" command, which can query the extended attributes of road center lines and road information lines.

​​ 6. Added the "Zoom Railway Line" command.

​ 7. Modify the "Road Network Density" command to directly generate tables in the picture or export EXCEL files.

​​ 8. Added the "Change Road Type" command to support modifying road grades.

   4. In terms of land use and indicators

​​ 1. The "Village Planning Guide 2014" has been added to the land code standard.

​​ 2. The calculation of the "heat consumption" indicator has been added to the plot attributes.

2. Modify the calculation methods of capacity indicators such as "water consumption", "sewage volume", "electricity consumption", "telecommunications capacity", "gas consumption", and "heat consumption" of the plot, and support "by building area", " There are three algorithms: "by plot area" and "by population".

3. Add "buffer analysis", "equidistant analysis" and other analysis commands.

​​ 4. Modify the analysis commands such as "Middle School Analysis" and "Elementary School Analysis" to add the functions of displaying out-of-range plots and checking the number of classes.

5. Add the "3D Parameters" command to support modifying the thickness of the plot displayed in the 3D state.

​ 6. Add the marking function for overlapping land boundary lines, such as marking the green line coinciding with the land boundary line, the yellow line coinciding with the land boundary line, etc.

7. Add commands such as "Indicator Comparison" and "Indicator Synchronization" to the plot indicators.

​ 8. Modify the plots and add the "Show plots", "Show indicators" and "Show both" commands to the plot display.

​ 9. The "System Drawings" command set has been deleted, and all the "System Drawings" commands have been integrated into the general drawing menu.

​5. In terms of pipelines

​​ 1. Three new pipeline function modules have been added, namely "gas pipeline module", "thermal pipeline module" and "oil pipeline module". New custom objects have been added to gas pipelines, thermal pipelines and oil pipelines, providing detailed functions such as pipeline drawing, pipeline modification, preliminary calculation of pipe diameters, hydraulic calculations, and indicator statistics.

​ ​ 2. Modify the hydraulic calculation functions of rainwater pipes and gas pipelines to support the export of EXCEL documents containing formulas.

3. The related contents such as water supply, rainwater, combined rainwater and sewage, electricity, telecommunications pipelines, etc. were deepened, and pipeline types and layer divisions were refined. For example: water supply pipelines are subdivided into layers such as water supply pipes, raw water pipes, reclaimed water pipes, hot water pipes, and circulating water pipes.

​​ 4. Modify the rainwater pipeline to support automatic data collection and automatic pipeline inspection functions. Data such as ground elevation, pipe bottom elevation, water catchment area, transfer area, etc. can be automatically collected. It can check whether there are problems with the pipeline flow direction, generate auxiliary lines for rainwater flow paths, and check whether the total catchment area and total transfer area are consistent with the planned boundary area.

5. The municipal facilities symbol library has been added, each type of facility is divided into layers in detail, and the municipal facilities table statistics function has been added.

​​ 6. Provides automatic drawing of "pipeline cross sections".

7. The pipeline cost budget has been added based on the pipeline diameter algorithm.

​ 8. Modify the "Pipeline" command set and delete the "Old Pipeline" related commands.

​​ 9. Added the "Node Edit" command to support modification of pipeline node data list.

10. The "Modify Pipe Diameter" command has been modified to support selecting multiple nodes for modification.

​​ 11. Added the "Legacy Conversion" command to support converting version 4.0 pipelines to version 7.0 pipelines.

​ 12. Added the "Import Other" command to support converting pipelines drawn by other software into pipelines of this software.

​6. In terms of earthwork calculations

​​ 1. Modify the "Earthwork" command set and delete the "old version of Earthwork" related commands.

​ 2. Modify the earthwork collection command and fix the problem of incomplete earthwork elevation collection due to lack of coverage of elevation points or design elevations.

​7. In terms of plans

​​ 1. The "Plan Making" function has been improved and subdivided into "General Plans" and "Sub-Plans". Integrate the "System Diagram" command set in the original "Plot" menu into the "Plan" menu and name it "General Diagram". The "General Plan" command supports the automatic generation of more than 10 general plan drawings. If the model content is modified, the content of the general plan drawing will be automatically modified accordingly.

​​ 2. The command set of "Partition Plans" has been rewritten and new technical methods have been adopted to make the operation easier.

​​ 3. Modify the "Plan Framing" command of the subdivision plan. Each frame only needs to define one frame boundary line, and supports numbering according to the frame boundary line.

​​ 4. The indicator table of the sub-map has been modified to be an ACAD table object. Users can easily define table headers, horizontal rows, vertical rows, etc.

5. Modify the page arrangement rules of sub-map plans. When there are too many control indicators on a page and the tables cannot be arranged, the plan page will be automatically added.

​ 6. The "Hide outside layer" and "Hide outside boundary" commands are added to the sub-map.

​​ 7. Modify the plan to layout mode. There is only one plan page under one layout, and the coordinates are aligned.

​ 8. Fixed a bug that caused CAD to exit when the layout was exported to the model.

​8. In other aspects

​​ 1. Modified the "www" and "iii" commands to solve the problem of extremely slow copy and paste speed.

​​ 2. Add the "Result Plot" command to support saving the output graphics files as ordinary AutoCAD format files (no Xiangyuan environment required).

​​ 3. Add the "Save Old Version" command to save the current graphics file output as a Xiangyuan Control Regulation version 6.000 format file, making the new version compatible with the previous old version.

​​ 4. Fixed the shortcut command and solved the problem of not supporting "select first and then execute".

5. Added the "Node Insert Block" command to support converting "point" objects into block objects.

​ 6. Added object property editing commands for older versions of AutoCAD.

​​ 7. Modify the "note coordinates" command to fix the problem that capture cannot be remembered.

​ 8. Fixed the problem that custom objects cannot be captured under 64-bit systems.

​​ 9. Modified the "Dimensioning" command and added the function of modifying the lead length.

10. The "Drawing Check" command has been upgraded and some problems with the command have been fixed.

Xiangyuan Control RegulationsFAQ

​​ 1. How can the drawings made by Xiangyuan be opened directly with ordinary AutoCAD?

​ Follow these steps:

​​​ ①First save the current DWG file, and then use the menu "Plan" -> "Plan Tools" -> "Object to Block (LZXVPORTTOBLK)" command to convert the plan object into an ordinary block.

②Use the "Data"->"Explode All" command to explode all Xiangyuan objects.

​ ​ ③Finally save it as another DWG file.

The DWG file saved can be opened directly with AutoCAD without installing Xiangyuan. The drawing can be given to Party A or used for printing.

Note: The DWG file saved using this method will explode all the Xiangyuan objects, so the Xiangyuan software can no longer recognize it and can only provide it to Party A as the final result. Remember to save the intermediate results.

​​​2. How to solve the Xiangyuan font display problem.

The text can be displayed normally in AutoCAD, but the text cannot be displayed when opened with Xiangyuan. The solution:

​ ​ Delete the c:Program FilesLzxSoftLzx4sys2acad.fmp file.

​​​3. When adding a new road, why can’t it intersect with the previously drawn road?

It may be that you have exploded the previously drawn roads into straight lines or arcs, so intersection processing cannot be performed. For several roads that require intersection processing, their side lines, side stone lines, and center lines must all be PLINE lines for normal operation. It is recommended that you use the "SETWID" command to convert the exploded straight line or arc into a PLINE line.

Xiangyuan Control Regulations Update Log

​​ 1. Modify user-submitted bugs

​ ​ 2.Add new features

​Special instructions:

​ ​​Note: This version is only available on the AutoCAD2008 platform. Other AutoCAD platforms load Xiangyuan Control Regulation 7.0. Please seek other methods.

It is prohibited to sell Xiangyuan Control Regulations 7.0, and the website will not be responsible for any copyright disputes caused!