3DMark is recognized as the most authoritative computer hardware performance testing tool in the industry, especially focusing on evaluating the game performance of graphics cards and entire machines. It performs high-intensity stress testing on the hardware by running a series of extreme 3D rendering scenes that approach or even exceed current game masterpieces, and generates accurate quantitative scores. The software provides a full range of testing projects from entry-level equipment to high-end ray-tracing graphics cards, and has become the industry standard for global gamers, overclocking enthusiasts and hardware evaluation institutions to test performance, compare hardware, and test stability. Next, let Huajun editor explain to you how 3dmark completes the task with a score of 2618 and how 3dmark completes the task with a score of 2618!
first step
Initial running score: 1902 (may use integrated graphics or low-end independent graphics, such as GT 710, HD 6450).
Bottleneck analysis:
Graphics card: directly affects the 3DMark graphics test score (accounting for about 70%).
Processor: If it is an old dual-core CPU (such as i3-3220), the physical test score may be limited, but if the task does not explicitly require physical scores, you may not upgrade for the time being.
Heat dissipation and power supply: Before upgrading the graphics card, you need to confirm whether the power supply is sufficient (for example, GTX 970 recommends ≥450W power supply).
Step 2
Target graphics card: GTX 970 4G (high cost performance, can easily reach 2618 points).
Alternative:
If the budget is limited: GTX 1050 Ti (about 1500-2000 points, needs to be overclocked or equipped with a high-frequency processor).
If you are pursuing higher scores: GTX 1060 3G/6G (about 3000-4000 points).
Step 3
Power-down operation: Turn off the computer and unplug the power cord.
Remove the side panel: Use a screwdriver to unscrew the chassis side panel screws.
Remove the old graphics card:
Loosen the graphics card retaining screw (back of case).
Gently unplug the graphics card power cord (if present).
Pull out the graphics card upwards (pay attention to the buckle position).
Install a new graphics card:
Align it with the PCIe slot and press it evenly until the buckle locks.
Connect the graphics card power cable (GTX 970 requires 6Pin or 8Pin power supply).
Reassembly: Replace the side panel and connect the monitor cable to the new graphics card connector.
Step 4
Install 3DMark and check “Time Spy” (DirectX 12 test, applicable to mainstream graphics cards). Optional installation of "Fire Strike" (DirectX 11 tested, compatible with older graphics cards).
Step 5
Open 3DMark and select "Time Spy".
Step 6
Click "Run" and the test will run automatically (about 5 minutes).
Step 7
The graphics card fan speed increases and the temperature increases (normal phenomenon). If screen blur/crash occurs, it means there is a problem with the graphics card driver or hardware (see troubleshooting below).
Step 8
The score meets the standard: if the total score is ≥ 2618, the task is completed (in the example it reaches 3000+, it is exceeded).
Insufficient points:
Check whether it is running on the integrated graphics card (NVIDIA control panel settings use discrete graphics by default).
Lower the test resolution (for example, from 4K to 1080p, the score will increase but the reference will decrease).
Upgrade the graphics card driver to the latest version.
The above is how the editor of Huajun compiled for you how to complete the task with a score of 2618 in 3dmark and the method of completing the task with a score of 2618 in 3dmark. I hope it can help you!
