DiskGenius is a disk management and data recovery software originally developed under DOS system. So how does diskgenius detect bad sectors on the disk? How does diskgenius detect bad sectors on a disk? Let the editor give you the answer below!
How does diskgenius detect disk bad sectors?
1. In the main interface of the software, select the disk that needs to be detected through the disk list, right-click the target disk, and select the "Bad Sector Detection and Repair" option.
2. Confirm that the disk selection is correct in the pop-up window, set the detection range as required (supports three modes: cylinder, sector, and capacity), click the "Start Detection" button, and the software will automatically scan the disk.
3. After the detection is completed, the software will generate a report containing information such as the number and location of bad sectors. Green represents normal areas, and the "damage" mark clearly identifies the location of bad sectors.
The above is the diskgenius compiled by Huajun editor for you. How to detect bad sectors on a disk? Diskgenius is a method for detecting disk bad sectors. I hope it can help you.
