Many friends who use the ghost installer are not familiar with the operation of reinstalling the system. The following editor will explain the method of reinstalling the system with the ghost installer. Friends in need should not miss it. I hope it will be helpful to you.
1. Make a Dabaicai U disk boot disk, download the ghost system iso image, right-click and use WinRAR to decompress the iso to a specified directory, such as F drive, find and copy the largest gho file, such as win7.gho;
2. Copy and paste the gho file into the GHO directory of the Chinese cabbage USB flash drive.
3. Insert the U disk into the computer where the system is to be reinstalled. After restarting the computer, keep pressing F12, F11, Esc and other shortcut keys to select the U disk option and press Enter.
4. Start from the U disk and enter the main menu of Chinese cabbage. Press the up and down arrow keys to select [02] and press Enter to run the pe system. For older models, select [03] to enter;
5. After entering the pe system, if you need to partition, you must back up all important data on the hard disk, then double-click to open the DG partition tool, right-click the hard disk and select [Quick Partition];
6. Set the number and size of partitions. The partition where you want to install the system must check "Primary Partition". It will be checked by default. The capacity is above 35G. If it is a solid-state drive, check "Align Partitions" for 4k alignment, and click OK;
7. Double-click to open [GHOST Clone] on the desktop, and in the pop-up interface, click OK directly;
8. In this interface, click Local→Partition→From Image;
9. Click the lower triangle and select the location of the gho file. The editor is in the GHO directory of the USB flash drive and click on the gho file, such as win7.gho;
10. In this interface, click OK directly;
11. Select the hard drive to install the system. Note that the entire hard drive is displayed here. Judge according to the capacity. For example, if the picture is a 60G hard drive, you must select the 61440 disk and click OK;
12. Select the installation drive letter here. Type must be Primary. Select the installation disk according to the capacity and click OK;
13. A prompt box will pop up, click Yes to start the system reinstallation process, and just wait for the progress bar to complete;
14. After the operation is completed, a prompt box will pop up. Click Reset Computer to restart the computer. During the restart process, you can pull out the USB flash drive;
15. Restart and enter this interface to perform system reinstallation and configuration operations. This process takes about 5 minutes;
16. Finally, boot into the new system interface, and the ghost reinstallation process is over.
Come and learn how to reinstall the system using the ghost installer. It will definitely help everyone.
