How to capture information reports with Wireshark - How to use Wireshark to capture information reports

Time: 2021-08-30Source: Huajun Software TutorialAuthor: Huluwa

How does Wireshark capture tips? Many users still don’t know what it means and how to operate it. The article brought to you today is about the operation method of Wireshark to capture tips. If you still don’t know, let’s learn it with the editor. .

Answer: 1. Please run and open Wireshark first, and then select the required interface name from the interface list in the software interface. If you want to capture traffic, select the wireless interface, and then select [Capture Options] to customize the configuration information. It is not necessary to set these for the current operation.

​​ 2. After we select the interface name, we can see the messages received in real time.

​​ 3. The following software screenshots are the demonstration results taken by the editor. Each line corresponds to a network message, and also has the current reception time, target IP address and source of the message.

104657-603c55a16c685.jpg

​​ 4. There is no need to select the stop button in the upper left corner of the interface to stop when continuing to capture messages.

104707-603c55ab9c414.jpg

Here are the operation methods for the Wireshark to capture the line. Friends in need, please come and read this article!

Related articles更多>>

Popular recommendations