How to mark geometric tolerances in AUTOCAD2004 graphics? How to mark geometric tolerances in AUTOCAD2004 graphics

Time: 2021-08-20Source: InternetAuthor: Shaobing

How to mark geometric tolerances on graphics in AUTOCAD2004? Many users are asking this question? Let's take a look at the steps of how to mark geometric tolerances on graphics in AUTOCAD2004. Friends who need it can refer to it.

Open the AUTOCAD2004 software and enter the drawing interface

Screenshot of the operation method of AUTOCAD2004 graphics shape and position tolerance marking

Draw the graphic file as shown below

Screenshot of the operation method of AUTOCAD2004 graphics shape and position tolerance marking

Mark the dimensions and reference position of the graphics

Screenshot of the operation method of AUTOCAD2004 graphics shape and position tolerance annotation

Click "Annotation/Tolerance" in the menu bar, and the "Geometry Tolerance" dialog box will appear.

Screenshot of the operation method of AUTOCAD2004 graphics shape and position tolerance annotation

In the Geometric Tolerance dialog box, add the appropriate Geometric Tolerance value according to the needs of the project

Screenshot of the operation method of AUTOCAD2004 graphics shape and position tolerance marking

Click OK, and you will get the graphic with the geometric tolerances marked as shown in the figure.

Screenshot of the operation method of AUTOCAD2004 graphics shape and position tolerance marking

The above is all the content brought to you by the editor. Have you all learned it?

Related articles更多>>

Popular recommendations