Don’t you know how to adjust the gear ratio of Forza Horizon 4? Then if you don’t know, you can take a look at the guide for adjusting the gear ratio of Forza Horizon 4 brought by the editor. I hope it can be helpful to everyone. help.
1. Adjusting the gear ratio is the most important and time-consuming task in drift car tuning. Perfectly tuned gear ratios keep the wheels spinning at just the right time and speed. Wheel speed while drifting has a greater impact on stability than anything else.
At full throttle you want the revs to hit the redline. If the speed drops, it means that the power output is not continuous enough, resulting in sudden correction and the inability to achieve/maintain the drift angle. If the RPM is too far away from the redline, it means you don't have enough power, resulting in a correction and an inability to achieve/maintain the drift angle.
2. The "golden gear" you need to find is usually gear 3/4. Drive to the drift zone of the tuning destination. Gear 3 is recommended because it is the middle gear and can be adjusted accordingly. Shift into 3rd gear and drift through a few corners. If you find that your car is stuck in the red zone (wandering too fast near the red line) and stalls, the final passing speed will be 3 blocks. This way the gears are longer and the redline speed is higher. Adjust the final transmission ratio so that the drift speed in 3rd gear is approximately 1000RPM before the red line.
3. Adjusting the final transmission ratio often does not directly solve the problem. If only one gear is wrong, adjust this gear individually. Avoid polarizing gears as this will cause you to lose some gears. For example, if you like 2/4 gear, but the 3rd gear will drop the chain in the middle of the drift, adjust the 3rd gear and accelerate to the 3rd gear. Repeat until satisfied.
The above is the Forza Horizon 4 gear ratio adjustment guide brought by the editor, don’t miss it.
