How to set IP for Zhongwei HD surveillance system - How to set IP for Zhongwei HD surveillance system

Time: 2021-02-04Source: Huajun Software TutorialAuthor: Xiaoxin

Don’t you know how to use the Zhongwei high-definition surveillance system to set the ip? Then if you don’t know how to do it, hurry up and take a look at the method of setting the ip of the Zhongwei high-definition surveillance system that the editor has shared with you. I hope that through the study of this tutorial, it can help Come to everyone.

First, enter the network parameter setting interface, as shown below:

1.jpg

Manually configure IP:

Manually enter the IP address assigned to this machine. Fill in "Subnet Mask"/"Gateway" according to the network environment where the DVR is located.

1. If there is no router device in the network, please assign an IP address on the same network segment;

1.jpg

2. If there is a routing device in the network, the corresponding gateway needs to be set up. "DNS" is to set the domain name server IP address (different in each city). After completing the settings, click [Save Settings] to take effect.

2.jpg

The above is the method of setting the IP of the Zhongwei HD surveillance system shared by the editor. Don’t miss it if you don’t know how to do it yet.

Related articles更多>>

Popular recommendations