How to use the friendly serial port debugging assistant to configure? Recently, many friends have been consulting the editor, so today the editor will explain to you the configuration method of the friendly serial port debugging assistant. Friends who don’t know how to do it should hurry up and learn it.
1. First, open the friendly serial port debugging assistant.
2. Configure the "com" port: the corresponding com port number in the device manager must be consistent.
3. Configure the "Baud rate": it must be consistent with the communication protocol. There are also "stop bits" and so on. Most of these parameters involve communication protocols. Please refer to the relevant regulations. But in most cases only the "baud rate" is configured.
4. Configure other functional parameters: such as "hexadecimal display", "black text on white background", etc., choose according to your own needs. Generally there is no configuration. After configuring, open the serial port and it will be OK.
5. Interface introduction: The black window above displays the received data. Write the data to be sent in the send column, and then click send. Pay attention to whether there are spaces, enter and other keys.
6. End: Now you can start your own serial port journey.
The above is the configuration method of the friendly serial port debugging assistant explained by the editor. I hope it can be helpful to everyone.
