How to cancel write protection in USBoot-How to cancel write protection in USBoot

Time: 2020-12-05Source: Huajun Software TutorialAuthor: Huluwa

How to cancel write protection in USBoot? Some friends may not know how to do it. Below, the editor will share with you how to cancel write protection in USBoot. Friends in need can read this article. I hope it can help everyone.

1. Open USBoot as follows: (Remember to select the U disk you need to unprotect the write protection and then perform the following operations)

Screenshot of USBoot (U disk boot disk creation tool)

2. After opening the software, select "Click here to select working mode" - [Reset parameters with 0]

Screenshot of USBoot (U disk boot disk creation tool)

3. Then select [Clear key data of U disk with 0] - [Start]

Screenshot of USBoot (U disk boot disk creation tool)
Screenshot of USBoot (U disk boot disk creation tool)

4. If a warning pop-up window appears, please back up what you need according to the prompts and then choose to cancel the write protection, or directly [OK] or [Yes]

Screenshot of USBoot (U disk boot disk creation tool)
Screenshot of USBoot (U disk boot disk creation tool)

5. USBoot (U disk boot disk creation tool) starts clearing the protection program and waits until it is cleared.

Screenshot of USBoot (U disk boot disk creation tool)

The above is the method shared by the editor to cancel write protection in USBoot. Friends who don’t know how to do it should hurry up and learn it.

Related articles更多>>

Popular recommendations