How to use AD16 to draw a 4-layer board? There may be many friends who still don’t know how to do it. Let me share with you the operation method of using AD16 to draw a 4-layer board. Friends in need can come and take a look. I hope it will be helpful to everyone. help.
First, start AD16 on the computer, create a new PCB file, and click File-New-PCB, as shown in the figure below
Click the menu Design-Layer Stack Manager to enter the PCB layer settings, as shown in the figure below
Select the checkbox 3D display and click the add layer button, as shown in the figure below
Click the button add layer--add layer tab, as shown in the figure below, the PCB becomes 3 layers, as shown in the figure below
Same as the fourth step above, continue to add layer, as shown in the figure below, to complete the setting of the 4-layer board.
Click the newly added layer in the layer name field to change the layer name to the actual required name, as shown in the figure below
Next, we actually draw a 4-layer board. First, import a 2-layer board, as shown in the figure below.
Follow the above steps to set up a 4-layer board, with all GND layers covered with copper, as shown in the figure below
The above is the operation method of using AD16 to draw a 4-layer board shared by the editor. Friends who don't know how to do it should hurry up and learn it.
