Recently, some friends have consulted the editor about how to restore the factory settings of the Nantian pr2e printer. The following will bring you the method of restoring the factory settings of the Nantian printer. Friends in need can come and learn more.
1Turn off the power.
2. Press and hold the Station1 and Station2 keys on the operation panel at the same time, then turn on the power, and do not let go until the printer initialization is completed.
3Insert a piece of A4 size paper into the paper input slot.
4The printer starts to suck paper and prints out two lines of prompt information.
5Press the Local key once, the printer enters the setting state.
6 If you press the Station1 key, accept and save the parameters; if you press the Station2 key, change the parameters until the parameters that need to be changed or set are set.
7. After changing the parameters, press the Local key once, and then press the Station1 key once. After hearing two crisp beeps from the printer, shut down.
According to the above, I will explain to you how to restore the factory settings of Nantian printer. Have you all learned it?
