Recently, some partners said that they do not know how to install the Phoenix system on their computers. So, how do you install the Phoenix system? Let’s take a look at the Phoenix system installation tutorial. Hope it can help those in need!
Preparation:
1. A USB flash drive (greater than or equal to 4G, installing the Phoenix system will clear the USB flash drive data)
2. USB disk installation tool USBMaker-1.0.1.exe
3. Phoenix OS(x86) system image Phoenix-x86-1.0-32-beta.zip
Install to USB flash drive (take Windows 10 as an example):
1. Download the USB disk installation tool USBMaker-1.0.1.exe and Phoenix OS (x86) system image
2. Insert the U disk into the computer, run the USBMaker software as an administrator (anti-virus software may mistakenly report it as a virus file), add the downloaded zip file, select the U disk you want to flash and execute writing, during which A confirmation prompt will pop up, just confirm.
3. Restart the computer. After the screen goes black, quickly press F12 to enter the BIOS interface (different computers have different entry methods, and the interface after entering is also different. You can check according to the model of your device, generally F2, F11, F12). After entering, select "P0 :Intel", press Enter to confirm the selection.
4. Press Enter to confirm selecting "Phoenix OS".
5. After pressing Enter to confirm, you will enter the startup screen. At this point, Phoenix OS has been installed.
Above, I have shared with you the Phoenix system installation method. Friends in need should hurry up and read this article.
