I believe that many novice friends will be confused by the operation of creating a processing coordinate system with UG10.0 programming. For this reason, the editor here specifically shares the operation tutorial of creating a processing coordinate system with UG10.0 programming. Friends in need can follow the editor. Get up and study.
First import the model file and switch to the UG processing module, as shown in the figure.
Right-click the blank space of the "Process Navigator" and select "Geometry View" to bring up the coordinate system interface, as shown in the figure.
Click "MCS-MLL" with the mouse to pop up the mcs dialog box, click the "csys" dialog box in the specified "Mcs", select "Automatic judgment", click the mouse on the surface of the model file, set the coordinate system of the center position of the model file, as shown in the figure, click OK, return to the MCS dialog box.
Click on the safety plane option, select "Planer", set the safety distance from the plane to 10.mm, and click Finish to complete the setting of the safety plane.
Click on the "WORKPIECE" option, set the components and blanks of the geometry, and click OK to complete the complete creation of the coordinate system, as shown in the figure.
The above explains the steps for creating a machining coordinate system using UG10.0 programming. I hope friends in need can learn it.
