Does everyone know the drawing operation of Revit MEP prefabricated parts supports and hangers? This article explains how to draw supports and hangers for Revit MEP prefabricated parts. Friends in need should not miss it.
1. Create supports and hangers:
In the MEP Fabrication Component window, set the family option to "Hangers"
Select the type of support and hanger you need and click Create on the corresponding air duct or pipe.
2. Adaptation of support and hanger size:
All prefabricated supports and hangers support size adaptation, but the pipes must be converted into MEP prefabricated pipe networks first. Ordinary MEP pipelines will not be self-adaptive and will adjust their length according to the width of the air duct or pipe. Can also be attached to structural bases for convenience including: slabs, beams and roofs
These relationships are preserved even if the pipeline is moved
3. Size adjustment of supports and hangers
By selecting the bracket in the view, you can adjust the size parameters of the bracket through several controls.
Including: the distance between the booms, the length of the cross arm, the direction of the bracket, etc. The other two link icons can also independently control the attachment relationship between a single boom and the structure.
For those of you who have just come into contact with Revit software, after learning the method of drawing supports and hangers for Revit MEP prefabricated parts in this article, do you think it will be easier to operate in the future?
