There must be some novice partners who are not yet familiar with UltraISO and do not know how to burn a disc. Here, the editor has shared a tutorial on how to burn a disc with UltraISO. Don’t miss it if you need it!
1. Image file, an image file with the extension *.iso (or 27 common disc image formats such as BIN, NRG, CIF, IMG, BWI, DAA, DMG, HFS, etc.).
2. UltraISO burning software. The computer needs to install the burning software (UltraISO Soft Disk Pass) to achieve burning.
3. Blank disc. A blank disc is required to burn ISO image.
4. Burning optical drive. The computer needs to have a burning optical drive. The burning optical drive is the most basic and necessary condition for burning images!
After determining the basic conditions, perform the burning operation:
The first step is to put the blank disc into the recorder.
The second step is to start the UltraISO burning software.
The third step is to enter the burning disc image interface. There are three methods (just choose any one):
1. Press F7 directly on the keyboard.
2. Use the mouse to click the burn button on the UltraISO interface.
3. Select "Tools -> Burn Disc Image".
After entering the disc image burning interface, you will see the following interface
The fourth step is to set the relevant burning options.
1. Burner, generally there is only one burner. The default is used here and does not need to be changed. (If there are more than two recorders, you can select the recorder you want to use through the drop-down menu button.)
2. Burning verification, click this option with the mouse to check whether your disc has been burned successfully after burning.
3. Writing speed, you can select the burning speed through the drop-down menu button: 24x or below is recommended for CD; 8x is best for DVD.
4. The writing method can be changed through the drop-down menu button, and the default is generally used.
5. Image file, select the image file, click the Browse button to find the image file to be burned. After everything is set up, the interface is as follows:
The fifth step is to burn. Click the "Burn" button to start burning the disc image. "Burn + Burn Verification" may take a few minutes to more than ten minutes. Please wait patiently for the burning to complete. After the burning is completed, the optical drive will automatically eject. Burning successful.
Are you still worried about how to burn a disc with UltraISO floppy disk? Come and learn the detailed operation of burning a disc with UltraISO. It will definitely help everyone.
