After installing Master Lu, some netizens still don’t know how to turn off the energy-saving and power-saving scheme. If you also know the relevant operations, you may wish to refer to the editor’s sharing of Master Lu’s method of turning off the energy-saving and power-saving scheme. I hope it can help. to everyone.
1. First of all, make sure whether the current power supply solution is Master Lu’s. Go to "Control Panel" and click "System and Security".
2. In "System and Security", click "Power Options".
3. In "Power Options", you can see what the currently selected power plan is. The picture shows the default settings of the system. When the Master Lu energy-saving plan is in effect, the "Balanced" plan here displays: "Master Lu Energy Saving Plan", and in the text description below, it is stated that "this plan needs to be turned off in Master Lu".
4. These are the two basic settings in the "Balance" plan, both set to "Never".
5. Open Master Lu and enter the "Temperature Management" interface. There are two tabs that can be switched, switch to the "Energy Saving and Cooling" tab. As shown in the picture, you can see that the current setting is "Smart Cooling".
6. Click "Close" to turn off the power plan and return the system to the default "Balanced" plan.
Above, I have shared with you the steps for Master Lu to turn off the energy saving program. Friends in need should hurry up and read this article.
